{"title":"£100 to £500","description":"\u003cp\u003eSingle plinths in standard sizes, small plant stands, wall shelves, table-top covers and turntables. Most first orders land here.\u003c\/p\u003e\u003cp\u003eIf you are buying one plinth and are not sure which, this is the band to look in, and \u003ca href=\"\/pages\/choosing-a-plinth-height\"\u003eChoosing a Plinth Height\u003c\/a\u003e will get you to the right one in about two minutes.\u003c\/p\u003e","products":[{"product_id":"display-plinth-300mm-by-300mm-by-600mm-high-in-matt-black-lacquer","title":"Display Plinth 300mm by 300mm by 600mm High in Matt Black Lacquer","description":"\u003cp\u003eA 300mm square plinth at 600mm tall, in matt black lacquer. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.9 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478148428,"sku":"PLS-PLI-051-ST","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478181196,"sku":"PLS-PLI-051-CT","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_600mm_High_in_Matt_Black_Lacquer.jpg?v=1789057367"},{"product_id":"display-plinth-300mm-by-300mm-by-600mm-high-in-birch-plywood","title":"Display Plinth 300mm by 300mm by 600mm High in Birch Plywood","description":"\u003cp\u003eA 300mm square plinth at 600mm tall, in birch plywood. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.0 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478213964,"sku":"PLS-PLI-052-ST","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478246732,"sku":"PLS-PLI-052-CT","price":349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_600mm_High_in_Birch_Plywood.jpg?v=1789057371"},{"product_id":"display-plinth-300mm-by-300mm-by-600mm-high-in-solid-ash","title":"Display Plinth 300mm by 300mm by 600mm High in Solid Ash","description":"\u003cp\u003eA 300mm square plinth at 600mm tall, in solid ash. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478279500,"sku":"PLS-PLI-053-ST","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478312268,"sku":"PLS-PLI-053-CT","price":489.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_600mm_High_in_Solid_Ash.jpg?v=1789057361"},{"product_id":"display-plinth-300mm-by-300mm-by-900mm-high-in-gallery-white-lacquer","title":"Display Plinth 300mm by 300mm by 900mm High in Gallery White Lacquer","description":"\u003cp\u003eA 300mm square plinth at 900mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478377804,"sku":"PLS-PLI-054-ST","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478410572,"sku":"PLS-PLI-054-CT","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_900mm_High_in_Gallery_White_Lacquer.jpg?v=1789057375"},{"product_id":"display-plinth-300mm-by-300mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 300mm by 300mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 300mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478443340,"sku":"PLS-PLI-055-ST","price":489.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478476108,"sku":"PLS-PLI-055-CT","price":519.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057367"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-birch-plywood","title":"Display Plinth 300mm by 300mm by 1100mm High in Birch Plywood","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.7 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478967628,"sku":"PLS-PLI-060-ST","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479000396,"sku":"PLS-PLI-060-CT","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Birch_Plywood.jpg?v=1789057380"},{"product_id":"display-plinth-400mm-by-400mm-by-600mm-high-in-gallery-white-lacquer","title":"Display Plinth 400mm by 400mm by 600mm High in Gallery White Lacquer","description":"\u003cp\u003eA 400mm square plinth at 600mm tall, in gallery white lacquer. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479328076,"sku":"PLS-PLI-062-ST","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479360844,"sku":"PLS-PLI-062-CT","price":489.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_600mm_High_in_Gallery_White_Lacquer.jpg?v=1789057375"},{"product_id":"display-plinth-400mm-by-400mm-by-600mm-high-in-matt-black-lacquer","title":"Display Plinth 400mm by 400mm by 600mm High in Matt Black Lacquer","description":"\u003cp\u003eA 400mm square plinth at 600mm tall, in matt black lacquer. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479393612,"sku":"PLS-PLI-063-ST","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479426380,"sku":"PLS-PLI-063-CT","price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_600mm_High_in_Matt_Black_Lacquer.jpg?v=1789057364"},{"product_id":"display-plinth-400mm-by-400mm-by-600mm-high-in-birch-plywood","title":"Display Plinth 400mm by 400mm by 600mm High in Birch Plywood","description":"\u003cp\u003eA 400mm square plinth at 600mm tall, in birch plywood. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 18.0 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479459148,"sku":"PLS-PLI-064-ST","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479491916,"sku":"PLS-PLI-064-CT","price":429.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_600mm_High_in_Birch_Plywood.jpg?v=1789057371"},{"product_id":"display-plinth-600mm-by-600mm-by-400mm-high-in-birch-plywood","title":"Display Plinth 600mm by 600mm by 400mm High in Birch Plywood","description":"\u003cp\u003eA 600mm square plinth at 400mm tall, in birch plywood. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.5 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785481818444,"sku":"PLS-PLI-086-ST","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785481851212,"sku":"PLS-PLI-086-CT","price":489.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_400mm_High_in_Birch_Plywood.jpg?v=1789057373"},{"product_id":"display-riser-300mm-square-by-400mm-high-in-gallery-white-lacquer","title":"Display Riser 300mm Square by 400mm High in Gallery White Lacquer","description":"\u003cp\u003eA solid block at 300mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm square by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484341580,"sku":"PLS-RIS-011-ST","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484374348,"sku":"PLS-RIS-011-CT","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_300mm_Square_by_400mm_High_in_Gallery_White_Lacquer.jpg?v=1789057393"},{"product_id":"display-riser-300mm-square-by-400mm-high-in-matt-black-lacquer","title":"Display Riser 300mm Square by 400mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 300mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm square by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484439884,"sku":"PLS-RIS-012-ST","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484472652,"sku":"PLS-RIS-012-CT","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_300mm_Square_by_400mm_High_in_Matt_Black_Lacquer.jpg?v=1789057388"},{"product_id":"set-of-three-graduated-risers-150mm-square-in-gallery-white-lacquer","title":"Set of Three Graduated Risers 150mm Square in Gallery White Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484505420,"sku":"PLS-RIS-013-ST","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484538188,"sku":"PLS-RIS-013-CT","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Graduated_Risers_150mm_Square_in_Gallery_White_Lacquer.jpg?v=1789126061"},{"product_id":"set-of-three-graduated-risers-150mm-square-in-matt-black-lacquer","title":"Set of Three Graduated Risers 150mm Square in Matt Black Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484570956,"sku":"PLS-RIS-014-ST","price":139.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484603724,"sku":"PLS-RIS-014-CT","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Graduated_Risers_150mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126066"},{"product_id":"set-of-five-graduated-risers-200mm-square-in-gallery-white-lacquer","title":"Set of Five Graduated Risers 200mm Square in Gallery White Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484636492,"sku":"PLS-RIS-015-ST","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484669260,"sku":"PLS-RIS-015-CT","price":279.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Five_Graduated_Risers_200mm_Square_in_Gallery_White_Lacquer.jpg?v=1789126078"},{"product_id":"set-of-five-graduated-risers-200mm-square-in-matt-black-lacquer","title":"Set of Five Graduated Risers 200mm Square in Matt Black Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484964172,"sku":"PLS-RIS-016-ST","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484996940,"sku":"PLS-RIS-016-CT","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Five_Graduated_Risers_200mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126065"},{"product_id":"plant-stand-300mm-square-by-400mm-high-in-powder-coated-steel","title":"Plant Stand 300mm Square by 400mm High in Powder Coated Steel","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm across by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 62kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.3 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 62kg, which is a 250mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 260mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485029708,"sku":"PLS-PLT-001-ST","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485062476,"sku":"PLS-PLT-001-CT","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_300mm_Square_by_400mm_High_in_Powder_Coated_Steel.jpg?v=1789126085"},{"product_id":"plant-stand-300mm-square-by-400mm-high-in-solid-oak","title":"Plant Stand 300mm Square by 400mm High in Solid Oak","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm across by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 62kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.8 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 62kg, which is a 250mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 260mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485095244,"sku":"PLS-PLT-002-ST","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485128012,"sku":"PLS-PLT-002-CT","price":139.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_300mm_Square_by_400mm_High_in_Solid_Oak.jpg?v=1789126094"},{"product_id":"plant-stand-300mm-square-by-400mm-high-in-solid-ash","title":"Plant Stand 300mm Square by 400mm High in Solid Ash","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm across by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 62kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.6 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 62kg, which is a 250mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 260mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485160780,"sku":"PLS-PLT-003-ST","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485193548,"sku":"PLS-PLT-003-CT","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_300mm_Square_by_400mm_High_in_Solid_Ash.jpg?v=1789126094"},{"product_id":"plant-stand-300mm-square-by-700mm-high-in-powder-coated-steel","title":"Plant Stand 300mm Square by 700mm High in Powder Coated Steel","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm across by 700mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 62kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 62kg, which is a 250mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 260mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485422924,"sku":"PLS-PLT-004-ST","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485455692,"sku":"PLS-PLT-004-CT","price":159.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_300mm_Square_by_700mm_High_in_Powder_Coated_Steel.jpg?v=1789126085"},{"product_id":"plant-stand-300mm-square-by-700mm-high-in-solid-oak","title":"Plant Stand 300mm Square by 700mm High in Solid Oak","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm across by 700mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 62kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.4 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 62kg, which is a 250mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 260mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485521228,"sku":"PLS-PLT-005-ST","price":184.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485553996,"sku":"PLS-PLT-005-CT","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_300mm_Square_by_700mm_High_in_Solid_Oak.jpg?v=1789126094"},{"product_id":"plant-stand-300mm-square-by-700mm-high-in-solid-ash","title":"Plant Stand 300mm Square by 700mm High in Solid Ash","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm across by 700mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 62kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.1 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 62kg, which is a 250mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 260mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485619532,"sku":"PLS-PLT-006-ST","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485652300,"sku":"PLS-PLT-006-CT","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_300mm_Square_by_700mm_High_in_Solid_Ash.jpg?v=1789126088"},{"product_id":"plant-stand-400mm-square-by-500mm-high-in-powder-coated-steel","title":"Plant Stand 400mm Square by 500mm High in Powder Coated Steel","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 500mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.7 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485685068,"sku":"PLS-PLT-007-ST","price":159.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485717836,"sku":"PLS-PLT-007-CT","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_400mm_Square_by_500mm_High_in_Powder_Coated_Steel.jpg?v=1789126087"},{"product_id":"plant-stand-400mm-square-by-500mm-high-in-solid-oak","title":"Plant Stand 400mm Square by 500mm High in Solid Oak","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 500mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.3 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485750604,"sku":"PLS-PLT-008-ST","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485783372,"sku":"PLS-PLT-008-CT","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_400mm_Square_by_500mm_High_in_Solid_Oak.jpg?v=1789126095"},{"product_id":"plant-stand-400mm-square-by-500mm-high-in-solid-ash","title":"Plant Stand 400mm Square by 500mm High in Solid Ash","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 500mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.9 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485881676,"sku":"PLS-PLT-009-ST","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785485914444,"sku":"PLS-PLT-009-CT","price":189.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_400mm_Square_by_500mm_High_in_Solid_Ash.jpg?v=1789126091"},{"product_id":"plant-stand-400mm-square-by-900mm-high-in-powder-coated-steel","title":"Plant Stand 400mm Square by 900mm High in Powder Coated Steel","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.5 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785485979980,"sku":"PLS-PLT-010-ST","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785486012748,"sku":"PLS-PLT-010-CT","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_400mm_Square_by_900mm_High_in_Powder_Coated_Steel.jpg?v=1789126087"},{"product_id":"plant-stand-400mm-square-by-900mm-high-in-solid-oak","title":"Plant Stand 400mm Square by 900mm High in Solid Oak","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.3 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785486274892,"sku":"PLS-PLT-011-ST","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785486307660,"sku":"PLS-PLT-011-CT","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_400mm_Square_by_900mm_High_in_Solid_Oak.jpg?v=1789126094"},{"product_id":"plant-stand-400mm-square-by-900mm-high-in-solid-ash","title":"Plant Stand 400mm Square by 900mm High in Solid Ash","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.8 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785486340428,"sku":"PLS-PLT-012-ST","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785486373196,"sku":"PLS-PLT-012-CT","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plant_Stand_400mm_Square_by_900mm_High_in_Solid_Ash.jpg?v=1789126094"},{"product_id":"round-plant-stand-350mm-by-600mm-high-in-powder-coated-steel","title":"Round Plant Stand 350mm by 600mm High in Powder Coated Steel","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 350mm across by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 350mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 68kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.1 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 68kg, which is a 300mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 310mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785486438732,"sku":"PLS-PLT-013-ST","price":174.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785486471500,"sku":"PLS-PLT-013-CT","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Round_Plant_Stand_350mm_by_600mm_High_in_Powder_Coated_Steel.jpg?v=1789126080"},{"product_id":"round-plant-stand-350mm-by-600mm-high-in-solid-oak","title":"Round Plant Stand 350mm by 600mm High in Solid Oak","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 350mm across by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 350mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 68kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.8 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 68kg, which is a 300mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 310mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785486504268,"sku":"PLS-PLT-014-ST","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785486537036,"sku":"PLS-PLT-014-CT","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Round_Plant_Stand_350mm_by_600mm_High_in_Solid_Oak.jpg?v=1789126092"},{"product_id":"round-plant-stand-350mm-by-600mm-high-in-solid-ash","title":"Round Plant Stand 350mm by 600mm High in Solid Ash","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 350mm across by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 350mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 68kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.5 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 68kg, which is a 300mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 310mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785486569804,"sku":"PLS-PLT-015-ST","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785486602572,"sku":"PLS-PLT-015-CT","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Round_Plant_Stand_350mm_by_600mm_High_in_Solid_Ash.jpg?v=1789126086"},{"product_id":"tall-specimen-plant-stand-400mm-by-1200mm-high-in-powder-coated-steel","title":"Tall Specimen Plant Stand 400mm by 1200mm High in Powder Coated Steel","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 1200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.2 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785486963020,"sku":"PLS-PLT-016-ST","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785486995788,"sku":"PLS-PLT-016-CT","price":309.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tall_Specimen_Plant_Stand_400mm_by_1200mm_High_in_Powder_Coated_Steel.jpg?v=1789126160"},{"product_id":"tall-specimen-plant-stand-400mm-by-1200mm-high-in-solid-oak","title":"Tall Specimen Plant Stand 400mm by 1200mm High in Solid Oak","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 1200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.0 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785487028556,"sku":"PLS-PLT-017-ST","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785487061324,"sku":"PLS-PLT-017-CT","price":389.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tall_Specimen_Plant_Stand_400mm_by_1200mm_High_in_Solid_Oak.jpg?v=1789126158"},{"product_id":"tall-specimen-plant-stand-400mm-by-1200mm-high-in-solid-ash","title":"Tall Specimen Plant Stand 400mm by 1200mm High in Solid Ash","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm across by 1200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.4 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 75kg, which is a 350mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 360mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785487094092,"sku":"PLS-PLT-018-ST","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785487126860,"sku":"PLS-PLT-018-CT","price":349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tall_Specimen_Plant_Stand_400mm_by_1200mm_High_in_Solid_Ash.jpg?v=1789126153"},{"product_id":"two-tier-plant-stand-600mm-wide-in-powder-coated-steel","title":"Two Tier Plant Stand 600mm Wide in Powder Coated Steel","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm across by 800mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 100kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.3 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 100kg, which is a 550mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 560mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785487159628,"sku":"PLS-PLT-019-ST","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785487192396,"sku":"PLS-PLT-019-CT","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Two_Tier_Plant_Stand_600mm_Wide_in_Powder_Coated_Steel.jpg?v=1789126169"},{"product_id":"two-tier-plant-stand-600mm-wide-in-solid-oak","title":"Two Tier Plant Stand 600mm Wide in Solid Oak","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm across by 800mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 100kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.3 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 100kg, which is a 550mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 560mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785487290700,"sku":"PLS-PLT-020-ST","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785487323468,"sku":"PLS-PLT-020-CT","price":359.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Two_Tier_Plant_Stand_600mm_Wide_in_Solid_Oak.jpg?v=1789126169"},{"product_id":"three-tier-corner-plant-stand-in-powder-coated-steel","title":"Three Tier Corner Plant Stand in Powder Coated Steel","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm across by 1200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 87kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 17.7 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 87kg, which is a 450mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 460mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785487421772,"sku":"PLS-PLT-022-ST","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785487454540,"sku":"PLS-PLT-022-CT","price":349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Three_Tier_Corner_Plant_Stand_in_Powder_Coated_Steel.jpg?v=1789126170"},{"product_id":"three-tier-corner-plant-stand-in-solid-oak","title":"Three Tier Corner Plant Stand in Solid Oak","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm across by 1200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 87kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.8 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 87kg, which is a 450mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 460mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785487487308,"sku":"PLS-PLT-023-ST","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785487520076,"sku":"PLS-PLT-023-CT","price":429.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Three_Tier_Corner_Plant_Stand_in_Solid_Oak.jpg?v=1789126165"},{"product_id":"three-tier-corner-plant-stand-in-solid-ash","title":"Three Tier Corner Plant Stand in Solid Ash","description":"\u003cp\u003eA plant stand rated for the weight of a pot when it is wet rather than when it is dry, which is roughly double and is the number most stands are not designed around.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm across by 1200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm top with a sealed surface and a 10mm lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded or mortice and tenon frame, depending on the material\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 87kg wet, tested at that weight for 30 days\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed or assembled depending on the size\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.1 kilograms\u003c\/li\u003e\n\u003cli\u003eWet rating: 87kg, which is a 450mm pot of soaked compost\u003c\/li\u003e\n\u003cli\u003eTop: sealed and lipped, so a spill stays on the stand\u003c\/li\u003e\n\u003cli\u003eDrip tray: a matching tray is available and we recommend it\u003c\/li\u003e\n\u003cli\u003eFeet: sealed and felt padded, so water does not wick into the base\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 460mm across\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe stand\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eLevelling feet where the height needs them\u003c\/li\u003e\n\u003cli\u003eA hex key where it is flat packed\u003c\/li\u003e\n\u003cli\u003eA watering note, because the commonest way to ruin a stand is to water the plant on it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785487552844,"sku":"PLS-PLT-024-ST","price":369.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785487585612,"sku":"PLS-PLT-024-CT","price":389.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Three_Tier_Corner_Plant_Stand_in_Solid_Ash.jpg?v=1789126168"},{"product_id":"set-of-three-pot-risers-in-powder-coated-steel","title":"Set of Three Pot Risers in Powder Coated Steel","description":"\u003cp\u003eThree risers in three sizes, which covers most of a room's worth of plants.\u003c\/p\u003e\u003cp\u003ePlants are heavier than people expect and wetter than furniture likes. A 400mm pot of wet compost is about 25 kilograms, and a stand that is fine for a sculpture will eventually rack under it. Everything in this part of the range is rated wet rather than dry, and everything that a pot sits directly on is either sealed or supplied with a tray, because the commonest way to ruin a good stand is to water the plant on it.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the diameter\u003c\/li\u003e\n\u003cli\u003eDisplay surface: sealed top surface with a lip\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel or solid timber with a sealed rebate\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads or braked castors\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one small carton, assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSealed: the surface and the joints, which is what a drip tray usually is not\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eTakes a pot up to 350mm\u003c\/li\u003e\n\u003cli\u003eSold singly unless the name says otherwise\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne set of three pot risers\u003c\/li\u003e\n\u003cli\u003eFelt pads and a spare set\u003c\/li\u003e\n\u003cli\u003eA care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eMatch the stand to the pot and not to the plant. A stand should be a little narrower than the pot so the pot reads as the object, and it needs to carry the weight of the compost wet rather than dry, which is roughly double. Height is worth thinking about for the plant rather than for the room: most house plants want to be up in the light rather than down at ankle level, and a plant on a 700mm stand next to a window will outgrow the same plant on the floor beside it inside a season.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Default Title","offer_id":58785488011596,"sku":"PLS-POT-005","price":109.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Pot_Risers_in_Powder_Coated_Steel.jpg?v=1789126090"},{"product_id":"tabletop-display-case-300mm-by-300mm-by-300mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 300mm by 300mm by 300mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a single small object, a model or a piece of jewellery. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 300mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 280mm by 280mm by 240mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785488535884,"sku":"PLS-TDC-002-TG","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785488568652,"sku":"PLS-TDC-002-LI","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785488601420,"sku":"PLS-TDC-002-UV","price":329.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_300mm_by_300mm_by_300mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126168"},{"product_id":"tabletop-display-case-300mm-by-300mm-by-300mm-high-with-a-solid-oak-base","title":"Tabletop Display Case 300mm by 300mm by 300mm High with a Solid Oak Base","description":"\u003cp\u003eA glass case on a solid oak base, sized for a single small object, a model or a piece of jewellery. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 300mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 280mm by 280mm by 240mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785488634188,"sku":"PLS-TDC-003-TG","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785488666956,"sku":"PLS-TDC-003-LI","price":399.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785488699724,"sku":"PLS-TDC-003-UV","price":449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_300mm_by_300mm_by_300mm_High_with_a_Solid_Oak_Base.jpg?v=1789126160"},{"product_id":"tabletop-display-case-400mm-by-400mm-by-400mm-high-with-a-gallery-white-lacquer-base","title":"Tabletop Display Case 400mm by 400mm by 400mm High with a Gallery White Lacquer Base","description":"\u003cp\u003eA glass case on a gallery white lacquer base, sized for a helmet, a vase or a group of small objects. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 380mm by 380mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785488732492,"sku":"PLS-TDC-004-TG","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785488765260,"sku":"PLS-TDC-004-LI","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785488798028,"sku":"PLS-TDC-004-UV","price":439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_400mm_by_400mm_by_400mm_High_with_a_Gallery_White_Lacquer_Base.jpg?v=1789126154"},{"product_id":"tabletop-display-case-400mm-by-400mm-by-400mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 400mm by 400mm by 400mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a helmet, a vase or a group of small objects. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 380mm by 380mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785488830796,"sku":"PLS-TDC-005-TG","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785488863564,"sku":"PLS-TDC-005-LI","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785488896332,"sku":"PLS-TDC-005-UV","price":439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_400mm_by_400mm_by_400mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126168"},{"product_id":"tabletop-display-case-400mm-by-400mm-by-400mm-high-with-a-solid-oak-base","title":"Tabletop Display Case 400mm by 400mm by 400mm High with a Solid Oak Base","description":"\u003cp\u003eA glass case on a solid oak base, sized for a helmet, a vase or a group of small objects. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 380mm by 380mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785488929100,"sku":"PLS-TDC-006-TG","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785488961868,"sku":"PLS-TDC-006-LI","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785488994636,"sku":"PLS-TDC-006-UV","price":599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_400mm_by_400mm_by_400mm_High_with_a_Solid_Oak_Base.jpg?v=1789126160"},{"product_id":"tabletop-display-case-500mm-by-300mm-by-400mm-high-with-a-gallery-white-lacquer-base","title":"Tabletop Display Case 500mm by 300mm by 400mm High with a Gallery White Lacquer Base","description":"\u003cp\u003eA glass case on a gallery white lacquer base, sized for a wide shallow case for a model, a knife or a fossil. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 300mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 480mm by 280mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785489027404,"sku":"PLS-TDC-007-TG","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785489060172,"sku":"PLS-TDC-007-LI","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785489092940,"sku":"PLS-TDC-007-UV","price":459.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_500mm_by_300mm_by_400mm_High_with_a_Gallery_White_Lacquer_Base.jpg?v=1789126154"},{"product_id":"tabletop-display-case-500mm-by-300mm-by-400mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 500mm by 300mm by 400mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a wide shallow case for a model, a knife or a fossil. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 300mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 480mm by 280mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785489125708,"sku":"PLS-TDC-008-TG","price":349.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785489158476,"sku":"PLS-TDC-008-LI","price":419.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785489191244,"sku":"PLS-TDC-008-UV","price":469.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_500mm_by_300mm_by_400mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126168"},{"product_id":"tabletop-display-case-500mm-by-300mm-by-400mm-high-with-a-solid-oak-base","title":"Tabletop Display Case 500mm by 300mm by 400mm High with a Solid Oak Base","description":"\u003cp\u003eA glass case on a solid oak base, sized for a wide shallow case for a model, a knife or a fossil. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 300mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 480mm by 280mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785489355084,"sku":"PLS-TDC-009-TG","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785489387852,"sku":"PLS-TDC-009-LI","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785489420620,"sku":"PLS-TDC-009-UV","price":639.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_500mm_by_300mm_by_400mm_High_with_a_Solid_Oak_Base.jpg?v=1789126158"},{"product_id":"tabletop-display-case-600mm-by-400mm-by-500mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 600mm by 400mm by 500mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a larger object, or a group arranged on a deck. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 400mm deep by 500mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 580mm by 380mm by 440mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 18.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785489944908,"sku":"PLS-TDC-011-TG","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785489977676,"sku":"PLS-TDC-011-LI","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490010444,"sku":"PLS-TDC-011-UV","price":609.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_600mm_by_400mm_by_500mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126167"},{"product_id":"tabletop-display-case-400mm-by-400mm-by-700mm-high-with-a-gallery-white-lacquer-base","title":"Tabletop Display Case 400mm by 400mm by 700mm High with a Gallery White Lacquer Base","description":"\u003cp\u003eA glass case on a gallery white lacquer base, sized for a tall narrow case, which is the shape for a single figure or a tall vessel. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 700mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 380mm by 380mm by 640mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785490600268,"sku":"PLS-TDC-016-TG","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785490633036,"sku":"PLS-TDC-016-LI","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490665804,"sku":"PLS-TDC-016-UV","price":659.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_400mm_by_400mm_by_700mm_High_with_a_Gallery_White_Lacquer_Base.jpg?v=1789126152"}],"url":"https:\/\/plinthstudiostore.com\/collections\/100-to-500-pounds.oembed","provider":"Plinth Studio","version":"1.0","type":"link"}