{"title":"1100mm High","description":"\u003cp\u003eFor small objects — 100 to 300mm tall — and for the deck of a plinth-mounted case, where the glass adds its own height above this line.\u003c\/p\u003e\u003cp\u003eA deliberate choice rather than a default: at 1,100mm the top surface is above comfortable seated eye level, so a visitor in a wheelchair will not see a small object properly. Specify it where the display is standing-first — retail, a window, a busy public route — and use 900 or 1,000mm where it has to serve everyone.\u003c\/p\u003e","products":[{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-brushed-brass","title":"Display Plinth 400mm by 400mm by 1100mm High in Brushed Brass","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in brushed brass. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 1.5mm brass sheet over a steel armature, brushed and lacquered, or left unlacquered to patinate if you ask\u003c\/li\u003e\n\u003cli\u003eFinish: 1.5mm brass sheet over a steel armature, brushed and lacquered, or left unlacquered to patinate if you ask\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 42.5 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785442038092,"sku":"PLS-PLI-002-ST","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785442070860,"sku":"PLS-PLI-002-CT","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Brushed_Brass.jpg?v=1789057380"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-terrazzo","title":"Display Plinth 400mm by 400mm by 1100mm High in Terrazzo","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in terrazzo. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: cast terrazzo with a marble aggregate, ground and sealed, no two panels the same\u003c\/li\u003e\n\u003cli\u003eFinish: cast terrazzo with a marble aggregate, ground and sealed, no two panels the same\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: three point levelling, because three points always sit flat on a gallery floor and four points never do\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 68.8 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, cast in one piece\u003c\/li\u003e\n\u003cli\u003eThree levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785442103628,"sku":"PLS-PLI-003-ST","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785442136396,"sku":"PLS-PLI-003-CT","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Terrazzo.jpg?v=1789057391"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-corian","title":"Display Plinth 400mm by 400mm by 1100mm High in Corian","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in corian. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid surface with the joints bonded and sanded flush, so a large plinth reads as one piece of material with no visible seam\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.4 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785442169164,"sku":"PLS-PLI-004-ST","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785442201932,"sku":"PLS-PLI-004-CT","price":1149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Corian.jpg?v=1789057365"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-solid-oak","title":"Display Plinth 500mm by 500mm by 1100mm High in Solid Oak","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in solid oak. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 41.5 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785443283276,"sku":"PLS-PLI-014-ST","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785443316044,"sku":"PLS-PLI-014-CT","price":1224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Solid_Oak.jpg?v=1789057387"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-solid-ash","title":"Display Plinth 500mm by 500mm by 1100mm High in Solid Ash","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in solid ash. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 39.3 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785443348812,"sku":"PLS-PLI-015-ST","price":1049.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785443381580,"sku":"PLS-PLI-015-CT","price":1099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Solid_Ash.jpg?v=1789057366"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-brushed-brass","title":"Display Plinth 500mm by 500mm by 1100mm High in Brushed Brass","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in brushed brass. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 1.5mm brass sheet over a steel armature, brushed and lacquered, or left unlacquered to patinate if you ask\u003c\/li\u003e\n\u003cli\u003eFinish: 1.5mm brass sheet over a steel armature, brushed and lacquered, or left unlacquered to patinate if you ask\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 52.6 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785443414348,"sku":"PLS-PLI-016-ST","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785443447116,"sku":"PLS-PLI-016-CT","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Brushed_Brass.jpg?v=1789057381"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-polished-concrete","title":"Display Plinth 500mm by 500mm by 1100mm High in Polished Concrete","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in polished concrete. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: glass fibre reinforced concrete, cast in one piece and diamond polished, which is heavy and is meant to be\u003c\/li\u003e\n\u003cli\u003eFinish: glass fibre reinforced concrete, cast in one piece and diamond polished, which is heavy and is meant to be\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: three point levelling, because three points always sit flat on a gallery floor and four points never do\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 89.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, cast in one piece\u003c\/li\u003e\n\u003cli\u003eThree levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785443479884,"sku":"PLS-PLI-017-ST","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785443512652,"sku":"PLS-PLI-017-CT","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Polished_Concrete.jpg?v=1789057394"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-terrazzo","title":"Display Plinth 500mm by 500mm by 1100mm High in Terrazzo","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in terrazzo. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: cast terrazzo with a marble aggregate, ground and sealed, no two panels the same\u003c\/li\u003e\n\u003cli\u003eFinish: cast terrazzo with a marble aggregate, ground and sealed, no two panels the same\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: three point levelling, because three points always sit flat on a gallery floor and four points never do\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 85.3 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, cast in one piece\u003c\/li\u003e\n\u003cli\u003eThree levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785443676492,"sku":"PLS-PLI-018-ST","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785443709260,"sku":"PLS-PLI-018-CT","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Terrazzo.jpg?v=1789057369"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-corian","title":"Display Plinth 500mm by 500mm by 1100mm High in Corian","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in corian. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid surface with the joints bonded and sanded flush, so a large plinth reads as one piece of material with no visible seam\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 46.3 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785443774796,"sku":"PLS-PLI-019-ST","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785443807564,"sku":"PLS-PLI-019-CT","price":1399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Corian.jpg?v=1789057369"},{"product_id":"display-plinth-600mm-by-600mm-by-1100mm-high-in-matt-black-lacquer","title":"Display Plinth 600mm by 600mm by 1100mm High in Matt Black Lacquer","description":"\u003cp\u003eA 600mm square plinth at 1100mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 44.5 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785444823372,"sku":"PLS-PLI-026-ST","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785444856140,"sku":"PLS-PLI-026-CT","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_1100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057375"},{"product_id":"display-plinth-600mm-by-600mm-by-1100mm-high-in-solid-oak","title":"Display Plinth 600mm by 600mm by 1100mm High in Solid Oak","description":"\u003cp\u003eA 600mm square plinth at 1100mm tall, in solid oak. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 49.8 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785444888908,"sku":"PLS-PLI-027-ST","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785444921676,"sku":"PLS-PLI-027-CT","price":1474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_1100mm_High_in_Solid_Oak.jpg?v=1789057392"},{"product_id":"display-plinth-600mm-by-600mm-by-1100mm-high-in-powder-coated-steel","title":"Display Plinth 600mm by 600mm by 1100mm High in Powder Coated Steel","description":"\u003cp\u003eA 600mm square plinth at 1100mm tall, in powder coated steel. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eFinish: 2mm folded steel, welded and ground before coating so no seam shows, in a fine texture powder coat\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 69.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785445183820,"sku":"PLS-PLI-029-ST","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785445216588,"sku":"PLS-PLI-029-CT","price":1174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_1100mm_High_in_Powder_Coated_Steel.jpg?v=1789057382"},{"product_id":"display-plinth-600mm-by-600mm-by-1100mm-high-in-terrazzo","title":"Display Plinth 600mm by 600mm by 1100mm High in Terrazzo","description":"\u003cp\u003eA 600mm square plinth at 1100mm tall, in terrazzo. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: cast terrazzo with a marble aggregate, ground and sealed, no two panels the same\u003c\/li\u003e\n\u003cli\u003eFinish: cast terrazzo with a marble aggregate, ground and sealed, no two panels the same\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: three point levelling, because three points always sit flat on a gallery floor and four points never do\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 102.3 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, cast in one piece\u003c\/li\u003e\n\u003cli\u003eThree levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785445380428,"sku":"PLS-PLI-032-ST","price":1624.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785445413196,"sku":"PLS-PLI-032-CT","price":1724.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_1100mm_High_in_Terrazzo.jpg?v=1789057397"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-gallery-white-lacquer","title":"Display Plinth 300mm by 300mm by 1100mm High in Gallery White Lacquer","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478803788,"sku":"PLS-PLI-058-ST","price":549.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478836556,"sku":"PLS-PLI-058-CT","price":579.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057375"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-matt-black-lacquer","title":"Display Plinth 300mm by 300mm by 1100mm High in Matt Black Lacquer","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478902092,"sku":"PLS-PLI-059-ST","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478934860,"sku":"PLS-PLI-059-CT","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057367"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-birch-plywood","title":"Display Plinth 300mm by 300mm by 1100mm High in Birch Plywood","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.7 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478967628,"sku":"PLS-PLI-060-ST","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479000396,"sku":"PLS-PLI-060-CT","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Birch_Plywood.jpg?v=1789057380"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-solid-ash","title":"Display Plinth 300mm by 300mm by 1100mm High in Solid Ash","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in solid ash. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.4 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479033164,"sku":"PLS-PLI-061-ST","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479065932,"sku":"PLS-PLI-061-CT","price":719.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Solid_Ash.jpg?v=1789057379"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-gallery-white-lacquer","title":"Display Plinth 400mm by 400mm by 1100mm High in Gallery White Lacquer","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.9 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480016204,"sku":"PLS-PLI-070-ST","price":689.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480048972,"sku":"PLS-PLI-070-CT","price":729.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057387"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-birch-plywood","title":"Display Plinth 400mm by 400mm by 1100mm High in Birch Plywood","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480311116,"sku":"PLS-PLI-072-ST","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480343884,"sku":"PLS-PLI-072-CT","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Birch_Plywood.jpg?v=1789057375"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-solid-ash","title":"Display Plinth 400mm by 400mm by 1100mm High in Solid Ash","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in solid ash. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.7 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480376652,"sku":"PLS-PLI-073-ST","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480409420,"sku":"PLS-PLI-073-CT","price":909.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Solid_Ash.jpg?v=1789057372"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-gallery-white-lacquer","title":"Display Plinth 500mm by 500mm by 1100mm High in Gallery White Lacquer","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480900940,"sku":"PLS-PLI-081-ST","price":839.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480933708,"sku":"PLS-PLI-081-CT","price":889.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057369"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-matt-black-lacquer","title":"Display Plinth 500mm by 500mm by 1100mm High in Matt Black Lacquer","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480966476,"sku":"PLS-PLI-082-ST","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480999244,"sku":"PLS-PLI-082-CT","price":909.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057372"},{"product_id":"display-plinth-600mm-by-600mm-by-1100mm-high-in-gallery-white-lacquer","title":"Display Plinth 600mm by 600mm by 1100mm High in Gallery White Lacquer","description":"\u003cp\u003eA 600mm square plinth at 1100mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 44.5 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482309964,"sku":"PLS-PLI-091-ST","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482342732,"sku":"PLS-PLI-091-CT","price":1049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_1100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057368"}],"url":"https:\/\/plinthstudiostore.com\/collections\/1100mm-high.oembed","provider":"Plinth Studio","version":"1.0","type":"link"}