{"title":"£500 to £1,000","description":"\u003cp\u003eLarge plinths, small plinth sets, table-top vitrines, tiered plant systems and wall-mounted cases.\u003c\/p\u003e\u003cp\u003eFree UK delivery starts at £500, so everything in this collection ships free unless it carries the £79 two-person charge — and the product page says which items do.\u003c\/p\u003e","products":[{"product_id":"made-to-measure-plant-display-to-a-window","title":"Made to Measure Plant Display to a Window","description":"\u003cp\u003eBuilt to the bay, the sill height and the light you actually have, which is the only way a plant display in a bay window ever fits.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence. You send dimensions, photographs and anything you have on the object, we send a drawing and a finish sample, you approve both, and only then does anything get cut or sprayed. Half at order and half before dispatch. Lead time is six to eight weeks and longer for anything with laminated glass in it, because that comes from a laminator rather than off a shelf.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: made to your dimensions, within the limit in the product name\u003c\/li\u003e\n\u003cli\u003eDisplay surface: as your drawing\u003c\/li\u003e\n\u003cli\u003eConstruction: as the equivalent standard piece, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eFinish: any finish in the range, or matched to a sample you send us\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard piece, and we will state it on the drawing\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: specified at order\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 62 kilograms\u003c\/li\u003e\n\u003cli\u003eLead time: 6 to 8 weeks, longer for laminated glass\u003c\/li\u003e\n\u003cli\u003eDrawing and a sprayed finish sample issued for approval before work starts\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eAccess: tell us the narrowest point on the route in and we design around it\u003c\/li\u003e\n\u003cli\u003eBatch record kept for five years so a matching piece can be made later\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once work has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour piece, made to the approved drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the drawing and the approved finish sample\u003c\/li\u003e\n\u003cli\u003eTouch up paint in the exact batch\u003c\/li\u003e\n\u003cli\u003eLevelling feet, fittings and a spanner\u003c\/li\u003e\n\u003cli\u003eA batch record card with the finish reference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58785477493068,"sku":"PLS-MTM-007-DEP","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58785477525836,"sku":"PLS-MTM-007-FUL","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Made_to_Measure_Plant_Display_to_a_Window.jpg?v=1789126087"},{"product_id":"display-plinth-300mm-by-300mm-by-900mm-high-in-gallery-white-lacquer","title":"Display Plinth 300mm by 300mm by 900mm High in Gallery White Lacquer","description":"\u003cp\u003eA 300mm square plinth at 900mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478377804,"sku":"PLS-PLI-054-ST","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478410572,"sku":"PLS-PLI-054-CT","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_900mm_High_in_Gallery_White_Lacquer.jpg?v=1789057375"},{"product_id":"display-plinth-300mm-by-300mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 300mm by 300mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 300mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478443340,"sku":"PLS-PLI-055-ST","price":489.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478476108,"sku":"PLS-PLI-055-CT","price":519.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057367"},{"product_id":"display-plinth-300mm-by-300mm-by-900mm-high-in-solid-ash","title":"Display Plinth 300mm by 300mm by 900mm High in Solid Ash","description":"\u003cp\u003eA 300mm square plinth at 900mm tall, in solid ash. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.0 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478672716,"sku":"PLS-PLI-057-ST","price":589.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478705484,"sku":"PLS-PLI-057-CT","price":629.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_900mm_High_in_Solid_Ash.jpg?v=1789057364"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-gallery-white-lacquer","title":"Display Plinth 300mm by 300mm by 1100mm High in Gallery White Lacquer","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478803788,"sku":"PLS-PLI-058-ST","price":549.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478836556,"sku":"PLS-PLI-058-CT","price":579.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057375"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-matt-black-lacquer","title":"Display Plinth 300mm by 300mm by 1100mm High in Matt Black Lacquer","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478902092,"sku":"PLS-PLI-059-ST","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478934860,"sku":"PLS-PLI-059-CT","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057367"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-birch-plywood","title":"Display Plinth 300mm by 300mm by 1100mm High in Birch Plywood","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.7 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478967628,"sku":"PLS-PLI-060-ST","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479000396,"sku":"PLS-PLI-060-CT","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Birch_Plywood.jpg?v=1789057380"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-solid-ash","title":"Display Plinth 300mm by 300mm by 1100mm High in Solid Ash","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in solid ash. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.4 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479033164,"sku":"PLS-PLI-061-ST","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479065932,"sku":"PLS-PLI-061-CT","price":719.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Solid_Ash.jpg?v=1789057379"},{"product_id":"display-plinth-400mm-by-400mm-by-600mm-high-in-solid-ash","title":"Display Plinth 400mm by 400mm by 600mm High in Solid Ash","description":"\u003cp\u003eA 400mm square plinth at 600mm tall, in solid ash. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.3 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479557452,"sku":"PLS-PLI-065-ST","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479590220,"sku":"PLS-PLI-065-CT","price":609.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_600mm_High_in_Solid_Ash.jpg?v=1789057368"},{"product_id":"display-plinth-400mm-by-400mm-by-900mm-high-in-gallery-white-lacquer","title":"Display Plinth 400mm by 400mm by 900mm High in Gallery White Lacquer","description":"\u003cp\u003eA 400mm square plinth at 900mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.6 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479622988,"sku":"PLS-PLI-066-ST","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479655756,"sku":"PLS-PLI-066-CT","price":639.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_900mm_High_in_Gallery_White_Lacquer.jpg?v=1789057376"},{"product_id":"display-plinth-400mm-by-400mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 400mm by 400mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 400mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.6 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479688524,"sku":"PLS-PLI-067-ST","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479721292,"sku":"PLS-PLI-067-CT","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057371"},{"product_id":"display-plinth-400mm-by-400mm-by-900mm-high-in-birch-plywood","title":"Display Plinth 400mm by 400mm by 900mm High in Birch Plywood","description":"\u003cp\u003eA 400mm square plinth at 900mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479885132,"sku":"PLS-PLI-068-ST","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479917900,"sku":"PLS-PLI-068-CT","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_900mm_High_in_Birch_Plywood.jpg?v=1789057393"},{"product_id":"display-plinth-400mm-by-400mm-by-900mm-high-in-solid-ash","title":"Display Plinth 400mm by 400mm by 900mm High in Solid Ash","description":"\u003cp\u003eA 400mm square plinth at 900mm tall, in solid ash. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 27.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479950668,"sku":"PLS-PLI-069-ST","price":749.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479983436,"sku":"PLS-PLI-069-CT","price":789.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_900mm_High_in_Solid_Ash.jpg?v=1789057376"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-gallery-white-lacquer","title":"Display Plinth 400mm by 400mm by 1100mm High in Gallery White Lacquer","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.9 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480016204,"sku":"PLS-PLI-070-ST","price":689.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480048972,"sku":"PLS-PLI-070-CT","price":729.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057387"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-birch-plywood","title":"Display Plinth 400mm by 400mm by 1100mm High in Birch Plywood","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480311116,"sku":"PLS-PLI-072-ST","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480343884,"sku":"PLS-PLI-072-CT","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Birch_Plywood.jpg?v=1789057375"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-solid-ash","title":"Display Plinth 400mm by 400mm by 1100mm High in Solid Ash","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in solid ash. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.7 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480376652,"sku":"PLS-PLI-073-ST","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480409420,"sku":"PLS-PLI-073-CT","price":909.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Solid_Ash.jpg?v=1789057372"},{"product_id":"display-plinth-400mm-by-400mm-by-1400mm-high-in-gallery-white-lacquer","title":"Display Plinth 400mm by 400mm by 1400mm High in Gallery White Lacquer","description":"\u003cp\u003eA 400mm square plinth at 1400mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 36.4 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480442188,"sku":"PLS-PLI-074-ST","price":829.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480474956,"sku":"PLS-PLI-074-CT","price":879.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1400mm_High_in_Gallery_White_Lacquer.jpg?v=1789057376"},{"product_id":"display-plinth-500mm-by-500mm-by-900mm-high-in-gallery-white-lacquer","title":"Display Plinth 500mm by 500mm by 900mm High in Gallery White Lacquer","description":"\u003cp\u003eA 500mm square plinth at 900mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.7 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480638796,"sku":"PLS-PLI-077-ST","price":729.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480671564,"sku":"PLS-PLI-077-CT","price":769.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_900mm_High_in_Gallery_White_Lacquer.jpg?v=1789057365"},{"product_id":"display-plinth-500mm-by-500mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 500mm by 500mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 500mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.7 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480704332,"sku":"PLS-PLI-078-ST","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480737100,"sku":"PLS-PLI-078-CT","price":789.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057368"},{"product_id":"display-plinth-500mm-by-500mm-by-900mm-high-in-birch-plywood","title":"Display Plinth 500mm by 500mm by 900mm High in Birch Plywood","description":"\u003cp\u003eA 500mm square plinth at 900mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480769868,"sku":"PLS-PLI-079-ST","price":639.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480802636,"sku":"PLS-PLI-079-CT","price":679.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_900mm_High_in_Birch_Plywood.jpg?v=1789057372"},{"product_id":"display-plinth-500mm-by-500mm-by-900mm-high-in-solid-ash","title":"Display Plinth 500mm by 500mm by 900mm High in Solid Ash","description":"\u003cp\u003eA 500mm square plinth at 900mm tall, in solid ash. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 33.6 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480835404,"sku":"PLS-PLI-080-ST","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480868172,"sku":"PLS-PLI-080-CT","price":959.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_900mm_High_in_Solid_Ash.jpg?v=1789057369"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-gallery-white-lacquer","title":"Display Plinth 500mm by 500mm by 1100mm High in Gallery White Lacquer","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480900940,"sku":"PLS-PLI-081-ST","price":839.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480933708,"sku":"PLS-PLI-081-CT","price":889.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057369"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-matt-black-lacquer","title":"Display Plinth 500mm by 500mm by 1100mm High in Matt Black Lacquer","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480966476,"sku":"PLS-PLI-082-ST","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480999244,"sku":"PLS-PLI-082-CT","price":909.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057372"},{"product_id":"display-plinth-600mm-by-600mm-by-400mm-high-in-gallery-white-lacquer","title":"Display Plinth 600mm by 600mm by 400mm High in Gallery White Lacquer","description":"\u003cp\u003eA 600mm square plinth at 400mm tall, in gallery white lacquer. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785481654604,"sku":"PLS-PLI-084-ST","price":519.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785481687372,"sku":"PLS-PLI-084-CT","price":549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_400mm_High_in_Gallery_White_Lacquer.jpg?v=1789057378"},{"product_id":"display-plinth-600mm-by-600mm-by-400mm-high-in-matt-black-lacquer","title":"Display Plinth 600mm by 600mm by 400mm High in Matt Black Lacquer","description":"\u003cp\u003eA 600mm square plinth at 400mm tall, in matt black lacquer. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785481720140,"sku":"PLS-PLI-085-ST","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785481752908,"sku":"PLS-PLI-085-CT","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_400mm_High_in_Matt_Black_Lacquer.jpg?v=1789057377"},{"product_id":"display-plinth-600mm-by-600mm-by-400mm-high-in-solid-ash","title":"Display Plinth 600mm by 600mm by 400mm High in Solid Ash","description":"\u003cp\u003eA 600mm square plinth at 400mm tall, in solid ash. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785481883980,"sku":"PLS-PLI-087-ST","price":649.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785481916748,"sku":"PLS-PLI-087-CT","price":689.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_400mm_High_in_Solid_Ash.jpg?v=1789057369"},{"product_id":"display-plinth-600mm-by-600mm-by-900mm-high-in-gallery-white-lacquer","title":"Display Plinth 600mm by 600mm by 900mm High in Gallery White Lacquer","description":"\u003cp\u003eA 600mm square plinth at 900mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 38.0 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482080588,"sku":"PLS-PLI-088-ST","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482113356,"sku":"PLS-PLI-088-CT","price":909.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_900mm_High_in_Gallery_White_Lacquer.jpg?v=1789057377"},{"product_id":"display-plinth-600mm-by-600mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 600mm by 600mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 600mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 38.0 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482146124,"sku":"PLS-PLI-089-ST","price":879.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482178892,"sku":"PLS-PLI-089-CT","price":929.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057369"},{"product_id":"display-plinth-600mm-by-600mm-by-900mm-high-in-birch-plywood","title":"Display Plinth 600mm by 600mm by 900mm High in Birch Plywood","description":"\u003cp\u003eA 600mm square plinth at 900mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 35.7 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482211660,"sku":"PLS-PLI-090-ST","price":759.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482244428,"sku":"PLS-PLI-090-CT","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_900mm_High_in_Birch_Plywood.jpg?v=1789057373"},{"product_id":"display-plinth-600mm-by-600mm-by-1100mm-high-in-gallery-white-lacquer","title":"Display Plinth 600mm by 600mm by 1100mm High in Gallery White Lacquer","description":"\u003cp\u003eA 600mm square plinth at 1100mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 44.5 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482309964,"sku":"PLS-PLI-091-ST","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482342732,"sku":"PLS-PLI-091-CT","price":1049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_1100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057368"},{"product_id":"display-plinth-800mm-by-400mm-by-900mm-high-in-gallery-white-lacquer","title":"Display Plinth 800mm by 400mm by 900mm High in Gallery White Lacquer","description":"\u003cp\u003eA 800 by 400mm plinth at 900mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 800mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 800mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.5 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482473804,"sku":"PLS-PLI-093-ST","price":849.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482506572,"sku":"PLS-PLI-093-CT","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_800mm_by_400mm_by_900mm_High_in_Gallery_White_Lacquer.jpg?v=1789057388"},{"product_id":"display-plinth-800mm-by-400mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 800mm by 400mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 800 by 400mm plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 800mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 800mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.5 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482539340,"sku":"PLS-PLI-094-ST","price":869.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482572108,"sku":"PLS-PLI-094-CT","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_800mm_by_400mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057382"},{"product_id":"display-plinth-1000mm-by-400mm-by-900mm-high-in-gallery-white-lacquer","title":"Display Plinth 1000mm by 400mm by 900mm High in Gallery White Lacquer","description":"\u003cp\u003eA 1000 by 400mm plinth at 900mm tall, in gallery white lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1000mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 1000mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 43.4 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482670412,"sku":"PLS-PLI-096-ST","price":979.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482703180,"sku":"PLS-PLI-096-CT","price":1024.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_1000mm_by_400mm_by_900mm_High_in_Gallery_White_Lacquer.jpg?v=1789057390"},{"product_id":"display-plinth-1000mm-by-400mm-by-900mm-high-in-birch-plywood","title":"Display Plinth 1000mm by 400mm by 900mm High in Birch Plywood","description":"\u003cp\u003eA 1000 by 400mm plinth at 900mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1000mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 1000mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 40.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482801484,"sku":"PLS-PLI-098-ST","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482834252,"sku":"PLS-PLI-098-CT","price":909.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_1000mm_by_400mm_by_900mm_High_in_Birch_Plywood.jpg?v=1789057389"},{"product_id":"display-plinth-1200mm-by-400mm-by-400mm-high-in-matt-black-lacquer","title":"Display Plinth 1200mm by 400mm by 400mm High in Matt Black Lacquer","description":"\u003cp\u003eA 1200 by 400mm plinth at 400mm tall, in matt black lacquer. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 400mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 1200mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 27.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482932556,"sku":"PLS-PLI-100-ST","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482965324,"sku":"PLS-PLI-100-CT","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_1200mm_by_400mm_by_400mm_High_in_Matt_Black_Lacquer.jpg?v=1789057388"},{"product_id":"display-plinth-1200mm-by-400mm-by-400mm-high-in-birch-plywood","title":"Display Plinth 1200mm by 400mm by 400mm High in Birch Plywood","description":"\u003cp\u003eA 1200 by 400mm plinth at 400mm tall, in birch plywood. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 400mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 1200mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483293004,"sku":"PLS-PLI-101-ST","price":569.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483325772,"sku":"PLS-PLI-101-CT","price":599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_1200mm_by_400mm_by_400mm_High_in_Birch_Plywood.jpg?v=1789057390"},{"product_id":"display-plinth-1200mm-by-400mm-by-400mm-high-in-solid-ash","title":"Display Plinth 1200mm by 400mm by 400mm High in Solid Ash","description":"\u003cp\u003eA 1200 by 400mm plinth at 400mm tall, in solid ash. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 400mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 1200mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: solid English ash, pale and straight grained, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.4 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483358540,"sku":"PLS-PLI-102-ST","price":799.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483391308,"sku":"PLS-PLI-102-CT","price":849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_1200mm_by_400mm_by_400mm_High_in_Solid_Ash.jpg?v=1789057391"},{"product_id":"tabletop-display-case-400mm-by-400mm-by-400mm-high-with-a-solid-oak-base","title":"Tabletop Display Case 400mm by 400mm by 400mm High with a Solid Oak Base","description":"\u003cp\u003eA glass case on a solid oak base, sized for a helmet, a vase or a group of small objects. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 380mm by 380mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785488929100,"sku":"PLS-TDC-006-TG","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785488961868,"sku":"PLS-TDC-006-LI","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785488994636,"sku":"PLS-TDC-006-UV","price":599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_400mm_by_400mm_by_400mm_High_with_a_Solid_Oak_Base.jpg?v=1789126160"},{"product_id":"tabletop-display-case-500mm-by-300mm-by-400mm-high-with-a-solid-oak-base","title":"Tabletop Display Case 500mm by 300mm by 400mm High with a Solid Oak Base","description":"\u003cp\u003eA glass case on a solid oak base, sized for a wide shallow case for a model, a knife or a fossil. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 300mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 480mm by 280mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785489355084,"sku":"PLS-TDC-009-TG","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785489387852,"sku":"PLS-TDC-009-LI","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785489420620,"sku":"PLS-TDC-009-UV","price":639.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_500mm_by_300mm_by_400mm_High_with_a_Solid_Oak_Base.jpg?v=1789126158"},{"product_id":"tabletop-display-case-600mm-by-400mm-by-500mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 600mm by 400mm by 500mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a larger object, or a group arranged on a deck. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 400mm deep by 500mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 580mm by 380mm by 440mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 18.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785489944908,"sku":"PLS-TDC-011-TG","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785489977676,"sku":"PLS-TDC-011-LI","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490010444,"sku":"PLS-TDC-011-UV","price":609.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_600mm_by_400mm_by_500mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126167"},{"product_id":"tabletop-display-case-600mm-by-400mm-by-500mm-high-with-a-solid-oak-base","title":"Tabletop Display Case 600mm by 400mm by 500mm High with a Solid Oak Base","description":"\u003cp\u003eA glass case on a solid oak base, sized for a larger object, or a group arranged on a deck. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 400mm deep by 500mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 580mm by 380mm by 440mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785490207052,"sku":"PLS-TDC-012-TG","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785490239820,"sku":"PLS-TDC-012-LI","price":719.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490272588,"sku":"PLS-TDC-012-UV","price":819.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_600mm_by_400mm_by_500mm_High_with_a_Solid_Oak_Base.jpg?v=1789126158"},{"product_id":"tabletop-display-case-800mm-by-400mm-by-400mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 800mm by 400mm by 400mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a long case, for a model ship, a rifle or a run of small objects in a row. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 800mm wide by 400mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 780mm by 380mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 65kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785490403660,"sku":"PLS-TDC-014-TG","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785490436428,"sku":"PLS-TDC-014-LI","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490469196,"sku":"PLS-TDC-014-UV","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_800mm_by_400mm_by_400mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126155"},{"product_id":"tabletop-display-case-800mm-by-400mm-by-400mm-high-with-a-solid-oak-base","title":"Tabletop Display Case 800mm by 400mm by 400mm High with a Solid Oak Base","description":"\u003cp\u003eA glass case on a solid oak base, sized for a long case, for a model ship, a rifle or a run of small objects in a row. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 800mm wide by 400mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 780mm by 380mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 65kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.3 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785490501964,"sku":"PLS-TDC-015-TG","price":749.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785490534732,"sku":"PLS-TDC-015-LI","price":889.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490567500,"sku":"PLS-TDC-015-UV","price":999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_800mm_by_400mm_by_400mm_High_with_a_Solid_Oak_Base.jpg?v=1789126164"},{"product_id":"tabletop-display-case-400mm-by-400mm-by-700mm-high-with-a-gallery-white-lacquer-base","title":"Tabletop Display Case 400mm by 400mm by 700mm High with a Gallery White Lacquer Base","description":"\u003cp\u003eA glass case on a gallery white lacquer base, sized for a tall narrow case, which is the shape for a single figure or a tall vessel. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 700mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 380mm by 380mm by 640mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785490600268,"sku":"PLS-TDC-016-TG","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785490633036,"sku":"PLS-TDC-016-LI","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490665804,"sku":"PLS-TDC-016-UV","price":659.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_400mm_by_400mm_by_700mm_High_with_a_Gallery_White_Lacquer_Base.jpg?v=1789126152"},{"product_id":"tabletop-display-case-400mm-by-400mm-by-700mm-high-with-a-solid-oak-base","title":"Tabletop Display Case 400mm by 400mm by 700mm High with a Solid Oak Base","description":"\u003cp\u003eA glass case on a solid oak base, sized for a tall narrow case, which is the shape for a single figure or a tall vessel. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 700mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 380mm by 380mm by 640mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: solid European oak, 20mm panels on a braced frame, finished in a hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.5 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785490796876,"sku":"PLS-TDC-018-TG","price":679.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785490829644,"sku":"PLS-TDC-018-LI","price":809.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490862412,"sku":"PLS-TDC-018-UV","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_400mm_by_400mm_by_700mm_High_with_a_Solid_Oak_Base.jpg?v=1789126164"}],"url":"https:\/\/plinthstudiostore.com\/collections\/500-to-1000-pounds.oembed","provider":"Plinth Studio","version":"1.0","type":"link"}