{"title":"Birch Plywood","description":"\u003cp\u003eExposed laminated edge, lacquered or oiled face. The material that reads as honest rather than as gallery-neutral, which is exactly why some shows want it and others do not.\u003c\/p\u003e\u003cp\u003ePractical notes: the visible edge is the point, so it is also the part that marks — birch ply takes a knock more visibly than sprayed MDF and it is harder to touch in. It is lighter than solid timber and considerably lighter than MDF, which makes it the sensible choice for touring work. Ply is also the only finish here where the grain pattern genuinely varies sheet to sheet; within a matched set we sequence it.\u003c\/p\u003e","products":[{"product_id":"freestanding-vitrine-800mm-by-500mm-by-1600mm-high-with-a-birch-plywood-base","title":"Freestanding Vitrine 800mm by 500mm by 1600mm High with a Birch Plywood Base","description":"\u003cp\u003eA full height glass case on a birch plywood base, sized for a wider case for a group, or for one object seen from the front rather than in the round.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 800mm wide by 500mm deep by 1600mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 780mm by 480mm by 760mm high\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel armature inside a birch plywood base, glass mitred and polished at every vertical corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 180kg on the deck, 15kg per glass shelf\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: hinged door with a concealed lock, keyed alike across an order\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 82.7 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 6mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eDust: gasketed base and a felt sealed door, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eDoor: hinged on the long side, opening 100 degrees, needs 600mm of swing\u003c\/li\u003e\n\u003cli\u003eShelves: one glass deck included, extra shelves available\u003c\/li\u003e\n\u003cli\u003eCable entry: a grommet in the base for a lighting or humidity lead\u003c\/li\u003e\n\u003cli\u003eBase height: 800mm, which is the standard for a case of this size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, flat packed, with a welded steel armature\u003c\/li\u003e\n\u003cli\u003eThe glass case, assembled in its own crate\u003c\/li\u003e\n\u003cli\u003eOne glass deck shelf\u003c\/li\u003e\n\u003cli\u003eA concealed lock with two keys\u003c\/li\u003e\n\u003cli\u003eLevelling feet, gaskets and a cable grommet\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785449673036,"sku":"PLS-VIT-013-TG","price":1399.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785449705804,"sku":"PLS-VIT-013-LI","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785449738572,"sku":"PLS-VIT-013-UV","price":1874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Freestanding_Vitrine_800mm_by_500mm_by_1600mm_High_with_a_Birch_Plywood_Base.jpg?v=1789126065"},{"product_id":"freestanding-vitrine-1000mm-by-500mm-by-1800mm-high-with-a-birch-plywood-base","title":"Freestanding Vitrine 1000mm by 500mm by 1800mm High with a Birch Plywood Base","description":"\u003cp\u003eA full height glass case on a birch plywood base, sized for a tall wide case for a collection shown as a group, with two shelves rather than one deck.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1000mm wide by 500mm deep by 1800mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 980mm by 480mm by 860mm high\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel armature inside a birch plywood base, glass mitred and polished at every vertical corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 205kg on the deck, 15kg per glass shelf\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: hinged door with a concealed lock, keyed alike across an order\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 97.8 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 6mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eDust: gasketed base and a felt sealed door, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eDoor: hinged on the long side, opening 100 degrees, needs 600mm of swing\u003c\/li\u003e\n\u003cli\u003eShelves: one glass deck included, extra shelves available\u003c\/li\u003e\n\u003cli\u003eCable entry: a grommet in the base for a lighting or humidity lead\u003c\/li\u003e\n\u003cli\u003eBase height: 900mm, which is the standard for a case of this size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, flat packed, with a welded steel armature\u003c\/li\u003e\n\u003cli\u003eThe glass case, assembled in its own crate\u003c\/li\u003e\n\u003cli\u003eOne glass deck shelf\u003c\/li\u003e\n\u003cli\u003eA concealed lock with two keys\u003c\/li\u003e\n\u003cli\u003eLevelling feet, gaskets and a cable grommet\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785450754380,"sku":"PLS-VIT-018-TG","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785450787148,"sku":"PLS-VIT-018-LI","price":1974.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785450819916,"sku":"PLS-VIT-018-UV","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Freestanding_Vitrine_1000mm_by_500mm_by_1800mm_High_with_a_Birch_Plywood_Base.jpg?v=1789126073"},{"product_id":"freestanding-vitrine-1200mm-by-600mm-by-1000mm-high-with-a-birch-plywood-base","title":"Freestanding Vitrine 1200mm by 600mm by 1000mm High with a Birch Plywood Base","description":"\u003cp\u003eA full height glass case on a birch plywood base, sized for a low table case, which is how a museum shows anything laid flat, from manuscripts to minerals.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 600mm deep by 1000mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 1180mm by 580mm by 460mm high\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel armature inside a birch plywood base, glass mitred and polished at every vertical corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 230kg on the deck, 15kg per glass shelf\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: hinged door with a concealed lock, keyed alike across an order\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 90.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 6mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eDust: gasketed base and a felt sealed door, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eDoor: hinged on the long side, opening 100 degrees, needs 700mm of swing\u003c\/li\u003e\n\u003cli\u003eShelves: one glass deck included, extra shelves available\u003c\/li\u003e\n\u003cli\u003eCable entry: a grommet in the base for a lighting or humidity lead\u003c\/li\u003e\n\u003cli\u003eBase height: 500mm, which is the standard for a case of this size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, flat packed, with a welded steel armature\u003c\/li\u003e\n\u003cli\u003eThe glass case, assembled in its own crate\u003c\/li\u003e\n\u003cli\u003eOne glass deck shelf\u003c\/li\u003e\n\u003cli\u003eA concealed lock with two keys\u003c\/li\u003e\n\u003cli\u003eLevelling feet, gaskets and a cable grommet\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785452687692,"sku":"PLS-VIT-023-TG","price":1524.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785452720460,"sku":"PLS-VIT-023-LI","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785452753228,"sku":"PLS-VIT-023-UV","price":2049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Freestanding_Vitrine_1200mm_by_600mm_by_1000mm_High_with_a_Birch_Plywood_Base.jpg?v=1789126075"},{"product_id":"freestanding-vitrine-600mm-by-400mm-by-1400mm-high-with-a-birch-plywood-base","title":"Freestanding Vitrine 600mm by 400mm by 1400mm High with a Birch Plywood Base","description":"\u003cp\u003eA full height glass case on a birch plywood base, sized for a case seen mostly from the front, against a wall, which needs less depth than a case you walk around.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 400mm deep by 1400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 580mm by 380mm by 660mm high\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel armature inside a birch plywood base, glass mitred and polished at every vertical corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 155kg on the deck, 15kg per glass shelf\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: hinged door with a concealed lock, keyed alike across an order\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 63.9 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 6mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eDust: gasketed base and a felt sealed door, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eDoor: hinged on the long side, opening 100 degrees, needs 500mm of swing\u003c\/li\u003e\n\u003cli\u003eShelves: one glass deck included, extra shelves available\u003c\/li\u003e\n\u003cli\u003eCable entry: a grommet in the base for a lighting or humidity lead\u003c\/li\u003e\n\u003cli\u003eBase height: 700mm, which is the standard for a case of this size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, flat packed, with a welded steel armature\u003c\/li\u003e\n\u003cli\u003eThe glass case, assembled in its own crate\u003c\/li\u003e\n\u003cli\u003eOne glass deck shelf\u003c\/li\u003e\n\u003cli\u003eA concealed lock with two keys\u003c\/li\u003e\n\u003cli\u003eLevelling feet, gaskets and a cable grommet\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785456390476,"sku":"PLS-VIT-032-TG","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785456423244,"sku":"PLS-VIT-032-LI","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785456456012,"sku":"PLS-VIT-032-UV","price":1474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Freestanding_Vitrine_600mm_by_400mm_by_1400mm_High_with_a_Birch_Plywood_Base.jpg?v=1789126066"},{"product_id":"set-of-three-graduated-plinths-400mm-square-in-birch-plywood","title":"Set of Three Graduated Plinths 400mm Square in Birch Plywood","description":"\u003cp\u003eThree plinths at 700, 900 and 1100mm, which is the group most galleries hang a room around. Graduated heights read as one composition rather than three objects.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Three plinths at 400mm square, heights 700mm, 900mm, 1100mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 72.2 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains three plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785466712396,"sku":"PLS-PST-003-ST","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785466745164,"sku":"PLS-PST-003-CT","price":1524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Graduated_Plinths_400mm_Square_in_Birch_Plywood.jpg?v=1789126083"},{"product_id":"set-of-five-graduated-plinths-400mm-square-in-birch-plywood","title":"Set of Five Graduated Plinths 400mm Square in Birch Plywood","description":"\u003cp\u003eFive heights on a 150mm ladder, for a wall of small work or a shop window that needs a rhythm rather than a row.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Five plinths at 400mm square, heights 600mm, 750mm, 900mm, 1050mm, 1200mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 120.4 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains five plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785467760972,"sku":"PLS-PST-008-ST","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785467793740,"sku":"PLS-PST-008-CT","price":2524.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Five_Graduated_Plinths_400mm_Square_in_Birch_Plywood.jpg?v=1789126081"},{"product_id":"set-of-three-plinths-300mm-square-at-one-height-in-birch-plywood","title":"Set of Three Plinths 300mm Square at One Height in Birch Plywood","description":"\u003cp\u003eThree identical plinths, which is what you want when the objects vary and the plinths should not.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Three plinths at 300mm square, heights 900mm, 900mm, 900mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 55.8 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains three plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785468154188,"sku":"PLS-PST-012-ST","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785468186956,"sku":"PLS-PST-012-CT","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Plinths_300mm_Square_at_One_Height_in_Birch_Plywood.jpg?v=1789126072"},{"product_id":"set-of-three-plinths-500mm-square-graduated-in-birch-plywood","title":"Set of Three Plinths 500mm Square Graduated in Birch Plywood","description":"\u003cp\u003eThe wider version of the graduated three, for objects that need a bigger top than a 400mm square gives them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Three plinths at 500mm square, heights 700mm, 900mm, 1100mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 89.4 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains three plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785468547404,"sku":"PLS-PST-017-ST","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785468580172,"sku":"PLS-PST-017-CT","price":1824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Plinths_500mm_Square_Graduated_in_Birch_Plywood.jpg?v=1789126094"},{"product_id":"set-of-seven-plinths-300mm-square-graduated-in-birch-plywood","title":"Set of Seven Plinths 300mm Square Graduated in Birch Plywood","description":"\u003cp\u003eSeven plinths on a 150mm ladder, which is a full window scheme or a small exhibition in one order.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Seven plinths at 300mm square, heights 500mm, 650mm, 800mm, 950mm, 1100mm, 1250mm, 1400mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 135.6 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains seven plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeven plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785469464908,"sku":"PLS-PST-022-ST","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785469497676,"sku":"PLS-PST-022-CT","price":2899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Seven_Plinths_300mm_Square_Graduated_in_Birch_Plywood.jpg?v=1789126092"},{"product_id":"small-shop-floor-package-in-birch-plywood","title":"Small Shop Floor Package in Birch Plywood","description":"\u003cp\u003eEverything needed for a shop floor of about 30 square metres, furnished so it can be rearranged weekly, in one delivery and one finish batch. Sized on our standard module so it groups, stacks and rearranges rather than being a set of unrelated objects.\u003c\/p\u003e\u003cp\u003eRetail display is judged on how quickly it can be changed. A window that takes two people a whole morning to reset gets reset less often than it should, and a shop floor that has to be dismantled to change a plinth height stops being changed at all. Everything here is sized to a common module so it stacks and groups, and everything over 900mm is on concealed glides so one person can move it across a floor without lifting it or marking the boards.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: footprints of 300, 400 and 600mm square, heights on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eDisplay surface: as the individual pieces, listed below\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on braced frames, lock jointed, with concealed glides on the tall pieces\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner, sprayed as one batch\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the individual pieces, all rated for retail use\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: locks fitted where the package includes a case, keyed alike\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 124.1 kilograms in total\u003c\/li\u003e\n\u003cli\u003eContents: five plinths on a 100mm height ladder, two nesting plinth pairs, one lockable tabletop case, four risers, concealed glides on everything over 900mm\u003c\/li\u003e\n\u003cli\u003eModule: everything is on the same footprint ladder so it groups\u003c\/li\u003e\n\u003cli\u003eSaving against buying the pieces separately: about 12 per cent\u003c\/li\u003e\n\u003cli\u003eBatch record kept for five years so you can add matching pieces\u003c\/li\u003e\n\u003cli\u003eOne delivery slot, two person delivery to the shop floor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive plinths on a 100mm height ladder\u003c\/li\u003e\n\u003cli\u003eTwo nesting plinth pairs\u003c\/li\u003e\n\u003cli\u003eOne lockable tabletop case\u003c\/li\u003e\n\u003cli\u003eFour risers\u003c\/li\u003e\n\u003cli\u003eConcealed glides on everything over 900mm\u003c\/li\u003e\n\u003cli\u003eLevelling feet and concealed glides where they apply\u003c\/li\u003e\n\u003cli\u003eTouch up paint in the exact batch\u003c\/li\u003e\n\u003cli\u003eOne hex key and one spanner for the whole package\u003c\/li\u003e\n\u003cli\u003eA layout card with arrangements that work in the stated area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785470382412,"sku":"PLS-RET-006-ST","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785470415180,"sku":"PLS-RET-006-CT","price":1674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Small_Shop_Floor_Package_in_Birch_Plywood.jpg?v=1789126166"},{"product_id":"jewellery-and-small-goods-package-in-birch-plywood","title":"Jewellery and Small Goods Package in Birch Plywood","description":"\u003cp\u003eEverything needed for a jewellery counter or a small goods concession, where everything has to lock, in one delivery and one finish batch. Sized on our standard module so it groups, stacks and rearranges rather than being a set of unrelated objects.\u003c\/p\u003e\u003cp\u003eRetail display is judged on how quickly it can be changed. A window that takes two people a whole morning to reset gets reset less often than it should, and a shop floor that has to be dismantled to change a plinth height stops being changed at all. Everything here is sized to a common module so it stacks and groups, and everything over 900mm is on concealed glides so one person can move it across a floor without lifting it or marking the boards.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: footprints of 300, 400 and 600mm square, heights on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eDisplay surface: as the individual pieces, listed below\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on braced frames, lock jointed, with concealed glides on the tall pieces\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner, sprayed as one batch\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the individual pieces, all rated for retail use\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: locks fitted where the package includes a case, keyed alike\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 73.3 kilograms in total\u003c\/li\u003e\n\u003cli\u003eContents: two lockable tabletop cases, one freestanding vitrine at 400mm square, six risers in three heights, two display necks and a set of ring pads, keyed alike locks throughout\u003c\/li\u003e\n\u003cli\u003eModule: everything is on the same footprint ladder so it groups\u003c\/li\u003e\n\u003cli\u003eSaving against buying the pieces separately: about 12 per cent\u003c\/li\u003e\n\u003cli\u003eBatch record kept for five years so you can add matching pieces\u003c\/li\u003e\n\u003cli\u003eOne delivery slot, two person delivery to the shop floor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo lockable tabletop cases\u003c\/li\u003e\n\u003cli\u003eOne freestanding vitrine at 400mm square\u003c\/li\u003e\n\u003cli\u003eSix risers in three heights\u003c\/li\u003e\n\u003cli\u003eTwo display necks and a set of ring pads\u003c\/li\u003e\n\u003cli\u003eKeyed alike locks throughout\u003c\/li\u003e\n\u003cli\u003eLevelling feet and concealed glides where they apply\u003c\/li\u003e\n\u003cli\u003eTouch up paint in the exact batch\u003c\/li\u003e\n\u003cli\u003eOne hex key and one spanner for the whole package\u003c\/li\u003e\n\u003cli\u003eA layout card with arrangements that work in the stated area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785470939468,"sku":"PLS-RET-009-ST","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785470972236,"sku":"PLS-RET-009-CT","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Jewellery_and_Small_Goods_Package_in_Birch_Plywood.jpg?v=1789126090"},{"product_id":"four-bay-collection-display-wall-1200mm-wide-in-birch-plywood","title":"Four Bay Collection Display Wall 1200mm Wide in Birch Plywood","description":"\u003cp\u003eA modular glazed display wall for a wall of small objects, models or ceramics, in four lockable glazed bays. Every bay is 600mm wide, lockable and individually lit, and the whole thing comes apart into single bays for a move.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 350mm deep by 1900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 4 bays, each 600mm wide with three adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003eConstruction: modular carcasses bolted together, each one a single bay\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg per shelf, 60kg per bay\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: each bay locks independently, keyed alike across the wall\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 77.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBays: 4, each independently lockable\u003c\/li\u003e\n\u003cli\u003eShelves: three adjustable glass shelves per bay, on a 32mm pitch\u003c\/li\u003e\n\u003cli\u003eLighting: a warm white LED strip in the top of every bay, plug in, dimmable\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm toughened doors, choose low iron at order\u003c\/li\u003e\n\u003cli\u003eComes apart into single bays, none over 30 kilograms\u003c\/li\u003e\n\u003cli\u003eAnti tip: a top restraint per bay, supplied, and it does need using\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour bay carcasses, flat packed\u003c\/li\u003e\n\u003cli\u003e12 adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003e4 glazed lockable doors with keys\u003c\/li\u003e\n\u003cli\u003eAn LED strip and a plug in driver for every bay\u003c\/li\u003e\n\u003cli\u003eConnecting bolts, levelling feet and top restraints\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785472905548,"sku":"PLS-CDW-004-TG","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785472938316,"sku":"PLS-CDW-004-LI","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Four_Bay_Collection_Display_Wall_1200mm_Wide_in_Birch_Plywood.jpg?v=1789057395"},{"product_id":"eight-bay-collection-display-wall-2400mm-wide-in-birch-plywood","title":"Eight Bay Collection Display Wall 2400mm Wide in Birch Plywood","description":"\u003cp\u003eA modular glazed display wall for a full wall in modules that come apart, so it fits in a lift and up a staircase. Every bay is 600mm wide, lockable and individually lit, and the whole thing comes apart into single bays for a move.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide by 350mm deep by 1900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 8 bays, each 600mm wide with three adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003eConstruction: modular carcasses bolted together, each one a single bay\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg per shelf, 60kg per bay\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: each bay locks independently, keyed alike across the wall\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 142.9 kilograms\u003c\/li\u003e\n\u003cli\u003eBays: 8, each independently lockable\u003c\/li\u003e\n\u003cli\u003eShelves: three adjustable glass shelves per bay, on a 32mm pitch\u003c\/li\u003e\n\u003cli\u003eLighting: a warm white LED strip in the top of every bay, plug in, dimmable\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm toughened doors, choose low iron at order\u003c\/li\u003e\n\u003cli\u003eComes apart into single bays, none over 30 kilograms\u003c\/li\u003e\n\u003cli\u003eAnti tip: a top restraint per bay, supplied, and it does need using\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight bay carcasses, flat packed\u003c\/li\u003e\n\u003cli\u003e24 adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003e8 glazed lockable doors with keys\u003c\/li\u003e\n\u003cli\u003eAn LED strip and a plug in driver for every bay\u003c\/li\u003e\n\u003cli\u003eConnecting bolts, levelling feet and top restraints\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785473757516,"sku":"PLS-CDW-011-TG","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785473790284,"sku":"PLS-CDW-011-LI","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Eight_Bay_Collection_Display_Wall_2400mm_Wide_in_Birch_Plywood.jpg?v=1789057395"},{"product_id":"four-bay-sneaker-and-model-display-wall-in-birch-plywood","title":"Four Bay Sneaker and Model Display Wall in Birch Plywood","description":"\u003cp\u003eA modular glazed display wall for sized around a shoe box and a 1:18 model, which is a specific enough brief that it is worth having its own product. Every bay is 600mm wide, lockable and individually lit, and the whole thing comes apart into single bays for a move.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 350mm deep by 1900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 4 bays, each 600mm wide with three adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003eConstruction: modular carcasses bolted together, each one a single bay\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg per shelf, 60kg per bay\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: each bay locks independently, keyed alike across the wall\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 82.7 kilograms\u003c\/li\u003e\n\u003cli\u003eBays: 4, each independently lockable\u003c\/li\u003e\n\u003cli\u003eShelves: three adjustable glass shelves per bay, on a 32mm pitch\u003c\/li\u003e\n\u003cli\u003eLighting: a warm white LED strip in the top of every bay, plug in, dimmable\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm toughened doors, choose low iron at order\u003c\/li\u003e\n\u003cli\u003eComes apart into single bays, none over 30 kilograms\u003c\/li\u003e\n\u003cli\u003eAnti tip: a top restraint per bay, supplied, and it does need using\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour bay carcasses, flat packed\u003c\/li\u003e\n\u003cli\u003e12 adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003e4 glazed lockable doors with keys\u003c\/li\u003e\n\u003cli\u003eAn LED strip and a plug in driver for every bay\u003c\/li\u003e\n\u003cli\u003eConnecting bolts, levelling feet and top restraints\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785474019660,"sku":"PLS-CDW-015-TG","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785474052428,"sku":"PLS-CDW-015-LI","price":1599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Four_Bay_Sneaker_and_Model_Display_Wall_in_Birch_Plywood.jpg?v=1789057397"},{"product_id":"six-bay-watch-and-small-object-display-wall-in-birch-plywood","title":"Six Bay Watch and Small Object Display Wall in Birch Plywood","description":"\u003cp\u003eA modular glazed display wall for shallow bays with close shelf spacing and individual bay locks, sized around a watch box rather than around a shelf. Every bay is 600mm wide, lockable and individually lit, and the whole thing comes apart into single bays for a move.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 350mm deep by 1900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 6 bays, each 600mm wide with three adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003eConstruction: modular carcasses bolted together, each one a single bay\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg per shelf, 60kg per bay\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: each bay locks independently, keyed alike across the wall\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 97.8 kilograms\u003c\/li\u003e\n\u003cli\u003eBays: 6, each independently lockable\u003c\/li\u003e\n\u003cli\u003eShelves: three adjustable glass shelves per bay, on a 32mm pitch\u003c\/li\u003e\n\u003cli\u003eLighting: a warm white LED strip in the top of every bay, plug in, dimmable\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm toughened doors, choose low iron at order\u003c\/li\u003e\n\u003cli\u003eComes apart into single bays, none over 30 kilograms\u003c\/li\u003e\n\u003cli\u003eAnti tip: a top restraint per bay, supplied, and it does need using\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix bay carcasses, flat packed\u003c\/li\u003e\n\u003cli\u003e18 adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003e6 glazed lockable doors with keys\u003c\/li\u003e\n\u003cli\u003eAn LED strip and a plug in driver for every bay\u003c\/li\u003e\n\u003cli\u003eConnecting bolts, levelling feet and top restraints\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785474806092,"sku":"PLS-CDW-023-TG","price":1574.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785474838860,"sku":"PLS-CDW-023-LI","price":1874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Six_Bay_Watch_and_Small_Object_Display_Wall_in_Birch_Plywood.jpg?v=1789126168"},{"product_id":"display-plinth-300mm-by-300mm-by-600mm-high-in-birch-plywood","title":"Display Plinth 300mm by 300mm by 600mm High in Birch Plywood","description":"\u003cp\u003eA 300mm square plinth at 600mm tall, in birch plywood. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.0 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478213964,"sku":"PLS-PLI-052-ST","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478246732,"sku":"PLS-PLI-052-CT","price":349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_600mm_High_in_Birch_Plywood.jpg?v=1789057371"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-birch-plywood","title":"Display Plinth 300mm by 300mm by 1100mm High in Birch Plywood","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.7 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478967628,"sku":"PLS-PLI-060-ST","price":479.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479000396,"sku":"PLS-PLI-060-CT","price":509.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Birch_Plywood.jpg?v=1789057380"},{"product_id":"display-plinth-400mm-by-400mm-by-600mm-high-in-birch-plywood","title":"Display Plinth 400mm by 400mm by 600mm High in Birch Plywood","description":"\u003cp\u003eA 400mm square plinth at 600mm tall, in birch plywood. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 18.0 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479459148,"sku":"PLS-PLI-064-ST","price":409.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479491916,"sku":"PLS-PLI-064-CT","price":429.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_600mm_High_in_Birch_Plywood.jpg?v=1789057371"},{"product_id":"display-plinth-400mm-by-400mm-by-900mm-high-in-birch-plywood","title":"Display Plinth 400mm by 400mm by 900mm High in Birch Plywood","description":"\u003cp\u003eA 400mm square plinth at 900mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 24.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479885132,"sku":"PLS-PLI-068-ST","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479917900,"sku":"PLS-PLI-068-CT","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_900mm_High_in_Birch_Plywood.jpg?v=1789057393"},{"product_id":"display-plinth-400mm-by-400mm-by-1100mm-high-in-birch-plywood","title":"Display Plinth 400mm by 400mm by 1100mm High in Birch Plywood","description":"\u003cp\u003eA 400mm square plinth at 1100mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 28.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480311116,"sku":"PLS-PLI-072-ST","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480343884,"sku":"PLS-PLI-072-CT","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_1100mm_High_in_Birch_Plywood.jpg?v=1789057375"},{"product_id":"display-plinth-500mm-by-500mm-by-900mm-high-in-birch-plywood","title":"Display Plinth 500mm by 500mm by 900mm High in Birch Plywood","description":"\u003cp\u003eA 500mm square plinth at 900mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 29.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480769868,"sku":"PLS-PLI-079-ST","price":639.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480802636,"sku":"PLS-PLI-079-CT","price":679.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_900mm_High_in_Birch_Plywood.jpg?v=1789057372"},{"product_id":"display-plinth-600mm-by-600mm-by-400mm-high-in-birch-plywood","title":"Display Plinth 600mm by 600mm by 400mm High in Birch Plywood","description":"\u003cp\u003eA 600mm square plinth at 400mm tall, in birch plywood. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.5 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785481818444,"sku":"PLS-PLI-086-ST","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785481851212,"sku":"PLS-PLI-086-CT","price":489.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_400mm_High_in_Birch_Plywood.jpg?v=1789057373"},{"product_id":"display-plinth-600mm-by-600mm-by-900mm-high-in-birch-plywood","title":"Display Plinth 600mm by 600mm by 900mm High in Birch Plywood","description":"\u003cp\u003eA 600mm square plinth at 900mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 35.7 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482211660,"sku":"PLS-PLI-090-ST","price":759.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482244428,"sku":"PLS-PLI-090-CT","price":809.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_900mm_High_in_Birch_Plywood.jpg?v=1789057373"},{"product_id":"display-plinth-1000mm-by-400mm-by-900mm-high-in-birch-plywood","title":"Display Plinth 1000mm by 400mm by 900mm High in Birch Plywood","description":"\u003cp\u003eA 1000 by 400mm plinth at 900mm tall, in birch plywood. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1000mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 1000mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 40.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482801484,"sku":"PLS-PLI-098-ST","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482834252,"sku":"PLS-PLI-098-CT","price":909.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_1000mm_by_400mm_by_900mm_High_in_Birch_Plywood.jpg?v=1789057389"},{"product_id":"display-plinth-1200mm-by-400mm-by-400mm-high-in-birch-plywood","title":"Display Plinth 1200mm by 400mm by 400mm High in Birch Plywood","description":"\u003cp\u003eA 1200 by 400mm plinth at 400mm tall, in birch plywood. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 400mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 1200mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18 layer birch plywood with the edge exposed and lacquered, so the layers read as a fine stripe around every corner\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 26.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483293004,"sku":"PLS-PLI-101-ST","price":569.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483325772,"sku":"PLS-PLI-101-CT","price":599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_1200mm_by_400mm_by_400mm_High_in_Birch_Plywood.jpg?v=1789057390"}],"url":"https:\/\/plinthstudiostore.com\/collections\/birch-plywood.oembed","provider":"Plinth Studio","version":"1.0","type":"link"}