{"title":"Display Lighting","description":"\u003cp\u003eCase lights, track heads and plinth-integrated lighting. Height and light are the same decision — a spot aimed at a 600mm object will not light a 1,100mm one.\u003c\/p\u003e\u003cp\u003eWorking figures: 100 lux minimum to see an object at all, 100–300 lux to read a label beside it, and 50 lux as the ceiling where conservation limits apply. For light-sensitive material the total annual dose matters more than the level; the numbers are on \u003ca href=\"\/pages\/specifying-a-case\"\u003eSpecifying a Display Case\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eWe are not electricians. Any fixed connection is work for a competent person under BS 7671.\u003c\/p\u003e","products":[{"product_id":"plinth-top-spotlight-on-a-concealed-arm","title":"Plinth Top Spotlight on a Concealed Arm","description":"\u003cp\u003eA small spot that mounts inside the plinth and comes up through the top on a concealed arm, so the light source is not on the ceiling and not in the way.\u003c\/p\u003e\u003cp\u003eLighting a display badly is easier than lighting it well and the difference is mostly colour rendering and heat. A high CRI source shows the colour of an object as it is, and a low one flattens reds and greys, which on a painting or a textile is the whole game. Heat matters because a lamp inside a sealed case is a heat source inside a sealed case, which drives the humidity around and does far more damage than the light does. Everything here is CRI 95 or better and runs cool, and the fibre optic kit keeps the source outside the case entirely.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length\u003c\/li\u003e\n\u003cli\u003eDisplay surface: not applicable\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium extrusion with an opal diffuser, or a fibre optic harness\u003c\/li\u003e\n\u003cli\u003eFinish: matt black or white, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: not applicable\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one small carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.2 kilograms\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K, or 3000K on request\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95 or better, and 97 on the case bars\u003c\/li\u003e\n\u003cli\u003eUltraviolet: essentially none, which is what a conservator will ask about\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003ePower: plug in driver supplied, no electrician needed\u003c\/li\u003e\n\u003cli\u003eLux guidance: 50 lux for paper and textiles, 150 for oil and wood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe fitting or kit as described\u003c\/li\u003e\n\u003cli\u003eA plug in dimmable driver and lead\u003c\/li\u003e\n\u003cli\u003eMounting clips, tape and cable management\u003c\/li\u003e\n\u003cli\u003eA lux guidance card for common object types\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003ePlug in, no electrician. Site the driver outside the case where you can reach it, and run the lead through the grommet in the base rather than under the gasket, which is how a sealed case stops being sealed.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Matt black","offer_id":58785495679308,"sku":"PLS-LIT-001-BK","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":58785495712076,"sku":"PLS-LIT-001-WH","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Plinth_Top_Spotlight_on_a_Concealed_Arm.jpg?v=1789126087"},{"product_id":"vitrine-top-light-bar-400mm","title":"Vitrine Top Light Bar 400mm","description":"\u003cp\u003eA light bar for the inside of a case top, at 2700K and CRI 97, running cool enough not to raise the temperature inside a sealed case.\u003c\/p\u003e\u003cp\u003eLighting a display badly is easier than lighting it well and the difference is mostly colour rendering and heat. A high CRI source shows the colour of an object as it is, and a low one flattens reds and greys, which on a painting or a textile is the whole game. Heat matters because a lamp inside a sealed case is a heat source inside a sealed case, which drives the humidity around and does far more damage than the light does. Everything here is CRI 95 or better and runs cool, and the fibre optic kit keeps the source outside the case entirely.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length\u003c\/li\u003e\n\u003cli\u003eDisplay surface: not applicable\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium extrusion with an opal diffuser, or a fibre optic harness\u003c\/li\u003e\n\u003cli\u003eFinish: matt black or white, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: not applicable\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one small carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.9 kilograms\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K, or 3000K on request\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95 or better, and 97 on the case bars\u003c\/li\u003e\n\u003cli\u003eUltraviolet: essentially none, which is what a conservator will ask about\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003ePower: plug in driver supplied, no electrician needed\u003c\/li\u003e\n\u003cli\u003eLux guidance: 50 lux for paper and textiles, 150 for oil and wood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe fitting or kit as described\u003c\/li\u003e\n\u003cli\u003eA plug in dimmable driver and lead\u003c\/li\u003e\n\u003cli\u003eMounting clips, tape and cable management\u003c\/li\u003e\n\u003cli\u003eA lux guidance card for common object types\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003ePlug in, no electrician. Site the driver outside the case where you can reach it, and run the lead through the grommet in the base rather than under the gasket, which is how a sealed case stops being sealed.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Matt black","offer_id":58785495744844,"sku":"PLS-LIT-002-BK","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":58785495777612,"sku":"PLS-LIT-002-WH","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Vitrine_Top_Light_Bar_400mm.jpg?v=1789126169"},{"product_id":"adjustable-case-spotlight-set-of-four","title":"Adjustable Case Spotlight Set of Four","description":"\u003cp\u003eFour small adjustable spots on a track for the inside of a case, aimed individually.\u003c\/p\u003e\u003cp\u003eLighting a display badly is easier than lighting it well and the difference is mostly colour rendering and heat. A high CRI source shows the colour of an object as it is, and a low one flattens reds and greys, which on a painting or a textile is the whole game. Heat matters because a lamp inside a sealed case is a heat source inside a sealed case, which drives the humidity around and does far more damage than the light does. Everything here is CRI 95 or better and runs cool, and the fibre optic kit keeps the source outside the case entirely.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length\u003c\/li\u003e\n\u003cli\u003eDisplay surface: not applicable\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium extrusion with an opal diffuser, or a fibre optic harness\u003c\/li\u003e\n\u003cli\u003eFinish: matt black or white, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: not applicable\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one small carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K, or 3000K on request\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95 or better, and 97 on the case bars\u003c\/li\u003e\n\u003cli\u003eUltraviolet: essentially none, which is what a conservator will ask about\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003ePower: plug in driver supplied, no electrician needed\u003c\/li\u003e\n\u003cli\u003eLux guidance: 50 lux for paper and textiles, 150 for oil and wood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe fitting or kit as described\u003c\/li\u003e\n\u003cli\u003eA plug in dimmable driver and lead\u003c\/li\u003e\n\u003cli\u003eMounting clips, tape and cable management\u003c\/li\u003e\n\u003cli\u003eA lux guidance card for common object types\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003ePlug in, no electrician. Site the driver outside the case where you can reach it, and run the lead through the grommet in the base rather than under the gasket, which is how a sealed case stops being sealed.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Matt black","offer_id":58785495941452,"sku":"PLS-LIT-005-BK","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":58785495974220,"sku":"PLS-LIT-005-WH","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Adjustable_Case_Spotlight_Set_of_Four.jpg?v=1789057370"},{"product_id":"under-shelf-light-strip-900mm","title":"Under Shelf Light Strip 900mm","description":"\u003cp\u003eA plug in strip for the underside of a shelf, with a diffuser so you see light rather than diodes.\u003c\/p\u003e\u003cp\u003eLighting a display badly is easier than lighting it well and the difference is mostly colour rendering and heat. A high CRI source shows the colour of an object as it is, and a low one flattens reds and greys, which on a painting or a textile is the whole game. Heat matters because a lamp inside a sealed case is a heat source inside a sealed case, which drives the humidity around and does far more damage than the light does. Everything here is CRI 95 or better and runs cool, and the fibre optic kit keeps the source outside the case entirely.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length\u003c\/li\u003e\n\u003cli\u003eDisplay surface: not applicable\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium extrusion with an opal diffuser, or a fibre optic harness\u003c\/li\u003e\n\u003cli\u003eFinish: matt black or white, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: not applicable\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one small carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.6 kilograms\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K, or 3000K on request\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95 or better, and 97 on the case bars\u003c\/li\u003e\n\u003cli\u003eUltraviolet: essentially none, which is what a conservator will ask about\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003ePower: plug in driver supplied, no electrician needed\u003c\/li\u003e\n\u003cli\u003eLux guidance: 50 lux for paper and textiles, 150 for oil and wood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe fitting or kit as described\u003c\/li\u003e\n\u003cli\u003eA plug in dimmable driver and lead\u003c\/li\u003e\n\u003cli\u003eMounting clips, tape and cable management\u003c\/li\u003e\n\u003cli\u003eA lux guidance card for common object types\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003ePlug in, no electrician. Site the driver outside the case where you can reach it, and run the lead through the grommet in the base rather than under the gasket, which is how a sealed case stops being sealed.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Matt black","offer_id":58785496334668,"sku":"PLS-LIT-006-BK","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":58785496367436,"sku":"PLS-LIT-006-WH","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Under_Shelf_Light_Strip_900mm.jpg?v=1789126157"},{"product_id":"warm-white-led-driver-and-plug-in-kit","title":"Warm White LED Driver and Plug In Kit","description":"\u003cp\u003eA dimmable driver and a plug in lead, which is the part everybody forgets to order.\u003c\/p\u003e\u003cp\u003eLighting a display badly is easier than lighting it well and the difference is mostly colour rendering and heat. A high CRI source shows the colour of an object as it is, and a low one flattens reds and greys, which on a painting or a textile is the whole game. Heat matters because a lamp inside a sealed case is a heat source inside a sealed case, which drives the humidity around and does far more damage than the light does. Everything here is CRI 95 or better and runs cool, and the fibre optic kit keeps the source outside the case entirely.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length\u003c\/li\u003e\n\u003cli\u003eDisplay surface: not applicable\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium extrusion with an opal diffuser, or a fibre optic harness\u003c\/li\u003e\n\u003cli\u003eFinish: matt black or white, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: not applicable\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one small carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.4 kilograms\u003c\/li\u003e\n\u003cli\u003eColour temperature: 2700K, or 3000K on request\u003c\/li\u003e\n\u003cli\u003eColour rendering: CRI 95 or better, and 97 on the case bars\u003c\/li\u003e\n\u003cli\u003eUltraviolet: essentially none, which is what a conservator will ask about\u003c\/li\u003e\n\u003cli\u003eDimming: trailing edge, down to 5 per cent\u003c\/li\u003e\n\u003cli\u003ePower: plug in driver supplied, no electrician needed\u003c\/li\u003e\n\u003cli\u003eLux guidance: 50 lux for paper and textiles, 150 for oil and wood\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe fitting or kit as described\u003c\/li\u003e\n\u003cli\u003eA plug in dimmable driver and lead\u003c\/li\u003e\n\u003cli\u003eMounting clips, tape and cable management\u003c\/li\u003e\n\u003cli\u003eA lux guidance card for common object types\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003ePlug in, no electrician. Site the driver outside the case where you can reach it, and run the lead through the grommet in the base rather than under the gasket, which is how a sealed case stops being sealed.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Matt black","offer_id":58785496662348,"sku":"PLS-LIT-008-BK","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":58785496695116,"sku":"PLS-LIT-008-WH","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Warm_White_LED_Driver_and_Plug_In_Kit.jpg?v=1789126157"}],"url":"https:\/\/plinthstudiostore.com\/collections\/lighting.oembed","provider":"Plinth Studio","version":"1.0","type":"link"}