{"title":"Matt Black Lacquer","description":"\u003cp\u003eSprayed MDF in a true matt black. The choice when you want the plinth to disappear rather than to read as a clean white volume — in a dark room, a black plinth reduces to a shadow and the object appears to float.\u003c\/p\u003e\u003cp\u003eTwo honest warnings. Matt black shows dust and fingerprints far more than white does, so it needs wiping more often in a public space. And it gives you no bounce light at all, which means the underside of whatever stands on it will be darker than you expect — worth checking before the lighting is set.\u003c\/p\u003e","products":[{"product_id":"display-plinth-600mm-by-600mm-by-1100mm-high-in-matt-black-lacquer","title":"Display Plinth 600mm by 600mm by 1100mm High in Matt Black Lacquer","description":"\u003cp\u003eA 600mm square plinth at 1100mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 44.5 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall, which is why it does not tip\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785444823372,"sku":"PLS-PLI-026-ST","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785444856140,"sku":"PLS-PLI-026-CT","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_1100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057375"},{"product_id":"freestanding-vitrine-600mm-by-600mm-by-1600mm-high-with-a-matt-black-lacquer-base","title":"Freestanding Vitrine 600mm by 600mm by 1600mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA full height glass case on a matt black lacquer base, sized for the standard gallery case, and the one that suits most sculpture up to about half a metre.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1600mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 580mm by 580mm by 760mm high\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel armature inside a matt black lacquer base, glass mitred and polished at every vertical corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 155kg on the deck, 15kg per glass shelf\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: hinged door with a concealed lock, keyed alike across an order\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 78.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 6mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eDust: gasketed base and a felt sealed door, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eDoor: hinged on the long side, opening 100 degrees, needs 700mm of swing\u003c\/li\u003e\n\u003cli\u003eShelves: one glass deck included, extra shelves available\u003c\/li\u003e\n\u003cli\u003eCable entry: a grommet in the base for a lighting or humidity lead\u003c\/li\u003e\n\u003cli\u003eBase height: 800mm, which is the standard for a case of this size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, flat packed, with a welded steel armature\u003c\/li\u003e\n\u003cli\u003eThe glass case, assembled in its own crate\u003c\/li\u003e\n\u003cli\u003eOne glass deck shelf\u003c\/li\u003e\n\u003cli\u003eA concealed lock with two keys\u003c\/li\u003e\n\u003cli\u003eLevelling feet, gaskets and a cable grommet\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785448493388,"sku":"PLS-VIT-007-TG","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785448526156,"sku":"PLS-VIT-007-LI","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785448558924,"sku":"PLS-VIT-007-UV","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Freestanding_Vitrine_600mm_by_600mm_by_1600mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126060"},{"product_id":"freestanding-vitrine-1200mm-by-600mm-by-1000mm-high-with-a-matt-black-lacquer-base","title":"Freestanding Vitrine 1200mm by 600mm by 1000mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA full height glass case on a matt black lacquer base, sized for a low table case, which is how a museum shows anything laid flat, from manuscripts to minerals.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 600mm deep by 1000mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 1180mm by 580mm by 460mm high\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel armature inside a matt black lacquer base, glass mitred and polished at every vertical corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 230kg on the deck, 15kg per glass shelf\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: hinged door with a concealed lock, keyed alike across an order\u003c\/li\u003e\n\u003cli\u003eDelivery: crated, kerbside on a pallet unless you book the two person service, which we recommend\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 96.0 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 6mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eDust: gasketed base and a felt sealed door, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eDoor: hinged on the long side, opening 100 degrees, needs 700mm of swing\u003c\/li\u003e\n\u003cli\u003eShelves: one glass deck included, extra shelves available\u003c\/li\u003e\n\u003cli\u003eCable entry: a grommet in the base for a lighting or humidity lead\u003c\/li\u003e\n\u003cli\u003eBase height: 500mm, which is the standard for a case of this size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, flat packed, with a welded steel armature\u003c\/li\u003e\n\u003cli\u003eThe glass case, assembled in its own crate\u003c\/li\u003e\n\u003cli\u003eOne glass deck shelf\u003c\/li\u003e\n\u003cli\u003eA concealed lock with two keys\u003c\/li\u003e\n\u003cli\u003eLevelling feet, gaskets and a cable grommet\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785452294476,"sku":"PLS-VIT-022-TG","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785452327244,"sku":"PLS-VIT-022-LI","price":2099.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785452360012,"sku":"PLS-VIT-022-UV","price":2374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Freestanding_Vitrine_1200mm_by_600mm_by_1000mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126065"},{"product_id":"touring-exhibition-case-500mm-by-500mm-by-1400mm-high-with-a-flight-crate-in-matt-black-lacquer","title":"Touring Exhibition Case 500mm by 500mm by 1400mm High with a Flight Crate in Matt Black Lacquer","description":"\u003cp\u003eA case built to travel, for a single object on a national tour, cased so it travels in its own crate and arrives ready to build. It comes apart into a flight crate without tools and goes back together in about twenty minutes by two people who have never seen it before, which is the actual specification.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1400mm high assembled\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 470mm by 470mm\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium framed carcass with replaceable panels, and a foam lined birch ply flight crate\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 110kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: museum lock, plus tamper evident seals for the road\u003c\/li\u003e\n\u003cli\u003eDelivery: in its own flight crate, on a pallet, kerbside or to the loading bay\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 96.0 kilograms including the crate\u003c\/li\u003e\n\u003cli\u003eBuild time: about 20 minutes for two people, tool free\u003c\/li\u003e\n\u003cli\u003eCrate: birch ply with foam cradles cut to the glass, castors fitted\u003c\/li\u003e\n\u003cli\u003ePanels: replaceable and repaintable on the road, and two spares are supplied\u003c\/li\u003e\n\u003cli\u003eGlass: laminated as standard, because toughened glass that breaks on tour ends the tour\u003c\/li\u003e\n\u003cli\u003eInstructions: a laminated build sheet lives inside the crate lid\u003c\/li\u003e\n\u003cli\u003eCrate external size: 700mm by 750mm by 1000mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe case, knocked down\u003c\/li\u003e\n\u003cli\u003eA foam lined birch ply flight crate with castors\u003c\/li\u003e\n\u003cli\u003eLaminated glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eTwo spare face panels and a touch up kit\u003c\/li\u003e\n\u003cli\u003eA museum lock, two keys and a pack of tamper evident seals\u003c\/li\u003e\n\u003cli\u003eA laminated build sheet fixed inside the crate lid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785464942924,"sku":"PLS-TUR-002-TG","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785464975692,"sku":"PLS-TUR-002-LI","price":2224.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Touring_Exhibition_Case_500mm_by_500mm_by_1400mm_High_with_a_Flight_Crate_in_Matt_Black_Lacquer.jpg?v=1789126156"},{"product_id":"touring-exhibition-case-800mm-by-500mm-by-1600mm-high-with-a-flight-crate-in-matt-black-lacquer","title":"Touring Exhibition Case 800mm by 500mm by 1600mm High with a Flight Crate in Matt Black Lacquer","description":"\u003cp\u003eA case built to travel, for a group of objects for a touring show, with the glass packed in a fitted foam cradle. It comes apart into a flight crate without tools and goes back together in about twenty minutes by two people who have never seen it before, which is the actual specification.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 800mm wide by 500mm deep by 1600mm high assembled\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 770mm by 470mm\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium framed carcass with replaceable panels, and a foam lined birch ply flight crate\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 140kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: museum lock, plus tamper evident seals for the road\u003c\/li\u003e\n\u003cli\u003eDelivery: in its own flight crate, on a pallet, kerbside or to the loading bay\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 118.0 kilograms including the crate\u003c\/li\u003e\n\u003cli\u003eBuild time: about 20 minutes for two people, tool free\u003c\/li\u003e\n\u003cli\u003eCrate: birch ply with foam cradles cut to the glass, castors fitted\u003c\/li\u003e\n\u003cli\u003ePanels: replaceable and repaintable on the road, and two spares are supplied\u003c\/li\u003e\n\u003cli\u003eGlass: laminated as standard, because toughened glass that breaks on tour ends the tour\u003c\/li\u003e\n\u003cli\u003eInstructions: a laminated build sheet lives inside the crate lid\u003c\/li\u003e\n\u003cli\u003eCrate external size: 1000mm by 750mm by 1100mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe case, knocked down\u003c\/li\u003e\n\u003cli\u003eA foam lined birch ply flight crate with castors\u003c\/li\u003e\n\u003cli\u003eLaminated glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eTwo spare face panels and a touch up kit\u003c\/li\u003e\n\u003cli\u003eA museum lock, two keys and a pack of tamper evident seals\u003c\/li\u003e\n\u003cli\u003eA laminated build sheet fixed inside the crate lid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785465827660,"sku":"PLS-TUR-004-TG","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785465860428,"sku":"PLS-TUR-004-LI","price":2699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Touring_Exhibition_Case_800mm_by_500mm_by_1600mm_High_with_a_Flight_Crate_in_Matt_Black_Lacquer.jpg?v=1789126161"},{"product_id":"touring-exhibition-case-1200mm-by-600mm-by-1000mm-high-with-a-flight-crate-in-matt-black-lacquer","title":"Touring Exhibition Case 1200mm by 600mm by 1000mm High with a Flight Crate in Matt Black Lacquer","description":"\u003cp\u003eA case built to travel, for a horizontal touring case for works on paper, which is the most fragile thing anybody tours. It comes apart into a flight crate without tools and goes back together in about twenty minutes by two people who have never seen it before, which is the actual specification.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 600mm deep by 1000mm high assembled\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 1170mm by 570mm\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium framed carcass with replaceable panels, and a foam lined birch ply flight crate\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 180kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: museum lock, plus tamper evident seals for the road\u003c\/li\u003e\n\u003cli\u003eDelivery: in its own flight crate, on a pallet, kerbside or to the loading bay\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 132.0 kilograms including the crate\u003c\/li\u003e\n\u003cli\u003eBuild time: about 20 minutes for two people, tool free\u003c\/li\u003e\n\u003cli\u003eCrate: birch ply with foam cradles cut to the glass, castors fitted\u003c\/li\u003e\n\u003cli\u003ePanels: replaceable and repaintable on the road, and two spares are supplied\u003c\/li\u003e\n\u003cli\u003eGlass: laminated as standard, because toughened glass that breaks on tour ends the tour\u003c\/li\u003e\n\u003cli\u003eInstructions: a laminated build sheet lives inside the crate lid\u003c\/li\u003e\n\u003cli\u003eCrate external size: 1400mm by 850mm by 800mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe case, knocked down\u003c\/li\u003e\n\u003cli\u003eA foam lined birch ply flight crate with castors\u003c\/li\u003e\n\u003cli\u003eLaminated glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eTwo spare face panels and a touch up kit\u003c\/li\u003e\n\u003cli\u003eA museum lock, two keys and a pack of tamper evident seals\u003c\/li\u003e\n\u003cli\u003eA laminated build sheet fixed inside the crate lid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785466089804,"sku":"PLS-TUR-006-TG","price":2499.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785466122572,"sku":"PLS-TUR-006-LI","price":2949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Touring_Exhibition_Case_1200mm_by_600mm_by_1000mm_High_with_a_Flight_Crate_in_Matt_Black_Lacquer.jpg?v=1789126159"},{"product_id":"touring-exhibition-case-600mm-by-600mm-by-1600mm-high-with-a-flight-crate-in-matt-black-lacquer","title":"Touring Exhibition Case 600mm by 600mm by 1600mm High with a Flight Crate in Matt Black Lacquer","description":"\u003cp\u003eA case built to travel, for the standard upright case in a touring specification, which is what most travelling shows actually need. It comes apart into a flight crate without tools and goes back together in about twenty minutes by two people who have never seen it before, which is the actual specification.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 1600mm high assembled\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 570mm by 570mm\u003c\/li\u003e\n\u003cli\u003eConstruction: aluminium framed carcass with replaceable panels, and a foam lined birch ply flight crate\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 120kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: museum lock, plus tamper evident seals for the road\u003c\/li\u003e\n\u003cli\u003eDelivery: in its own flight crate, on a pallet, kerbside or to the loading bay\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 108.0 kilograms including the crate\u003c\/li\u003e\n\u003cli\u003eBuild time: about 20 minutes for two people, tool free\u003c\/li\u003e\n\u003cli\u003eCrate: birch ply with foam cradles cut to the glass, castors fitted\u003c\/li\u003e\n\u003cli\u003ePanels: replaceable and repaintable on the road, and two spares are supplied\u003c\/li\u003e\n\u003cli\u003eGlass: laminated as standard, because toughened glass that breaks on tour ends the tour\u003c\/li\u003e\n\u003cli\u003eInstructions: a laminated build sheet lives inside the crate lid\u003c\/li\u003e\n\u003cli\u003eCrate external size: 800mm by 850mm by 1100mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe case, knocked down\u003c\/li\u003e\n\u003cli\u003eA foam lined birch ply flight crate with castors\u003c\/li\u003e\n\u003cli\u003eLaminated glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eTwo spare face panels and a touch up kit\u003c\/li\u003e\n\u003cli\u003eA museum lock, two keys and a pack of tamper evident seals\u003c\/li\u003e\n\u003cli\u003eA laminated build sheet fixed inside the crate lid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785466319180,"sku":"PLS-TUR-008-TG","price":2074.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785466351948,"sku":"PLS-TUR-008-LI","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Touring_Exhibition_Case_600mm_by_600mm_by_1600mm_High_with_a_Flight_Crate_in_Matt_Black_Lacquer.jpg?v=1789126166"},{"product_id":"set-of-three-graduated-plinths-400mm-square-in-matt-black-lacquer","title":"Set of Three Graduated Plinths 400mm Square in Matt Black Lacquer","description":"\u003cp\u003eThree plinths at 700, 900 and 1100mm, which is the group most galleries hang a room around. Graduated heights read as one composition rather than three objects.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Three plinths at 400mm square, heights 700mm, 900mm, 1100mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 76.8 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains three plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785466581324,"sku":"PLS-PST-002-ST","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785466614092,"sku":"PLS-PST-002-CT","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Graduated_Plinths_400mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126066"},{"product_id":"set-of-five-graduated-plinths-400mm-square-in-matt-black-lacquer","title":"Set of Five Graduated Plinths 400mm Square in Matt Black Lacquer","description":"\u003cp\u003eFive heights on a 150mm ladder, for a wall of small work or a shop window that needs a rhythm rather than a row.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Five plinths at 400mm square, heights 600mm, 750mm, 900mm, 1050mm, 1200mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 128.0 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains five plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785467171148,"sku":"PLS-PST-007-ST","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785467203916,"sku":"PLS-PST-007-CT","price":2924.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Five_Graduated_Plinths_400mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126074"},{"product_id":"set-of-three-plinths-300mm-square-at-one-height-in-matt-black-lacquer","title":"Set of Three Plinths 300mm Square at One Height in Matt Black Lacquer","description":"\u003cp\u003eThree identical plinths, which is what you want when the objects vary and the plinths should not.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Three plinths at 300mm square, heights 900mm, 900mm, 900mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 59.4 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains three plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785468088652,"sku":"PLS-PST-011-ST","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785468121420,"sku":"PLS-PST-011-CT","price":1399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Plinths_300mm_Square_at_One_Height_in_Matt_Black_Lacquer.jpg?v=1789126082"},{"product_id":"set-of-three-plinths-500mm-square-graduated-in-matt-black-lacquer","title":"Set of Three Plinths 500mm Square Graduated in Matt Black Lacquer","description":"\u003cp\u003eThe wider version of the graduated three, for objects that need a bigger top than a 400mm square gives them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Three plinths at 500mm square, heights 700mm, 900mm, 1100mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 95.1 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains three plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785468449100,"sku":"PLS-PST-016-ST","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785468481868,"sku":"PLS-PST-016-CT","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Plinths_500mm_Square_Graduated_in_Matt_Black_Lacquer.jpg?v=1789126068"},{"product_id":"set-of-seven-plinths-300mm-square-graduated-in-matt-black-lacquer","title":"Set of Seven Plinths 300mm Square Graduated in Matt Black Lacquer","description":"\u003cp\u003eSeven plinths on a 150mm ladder, which is a full window scheme or a small exhibition in one order.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Seven plinths at 300mm square, heights 500mm, 650mm, 800mm, 950mm, 1100mm, 1250mm, 1400mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 144.2 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains seven plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eBallasted on anything over 900mm\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeven plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785469137228,"sku":"PLS-PST-021-ST","price":3174.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785469169996,"sku":"PLS-PST-021-CT","price":3374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Seven_Plinths_300mm_Square_Graduated_in_Matt_Black_Lacquer.jpg?v=1789126077"},{"product_id":"set-of-four-nesting-plinths-600mm-square-in-matt-black-lacquer","title":"Set of Four Nesting Plinths 600mm Square in Matt Black Lacquer","description":"\u003cp\u003eFour that nest inside each other for storage, which is the difference between a shop that changes its window and one that does not.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four plinths at 600mm square, heights 400mm, 600mm, 800mm, 1000mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm on every plinth in the set\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed in one batch so the whole set matches\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg per plinth evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no locks, these are open plinths\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 126.2 kilograms for the set\u003c\/li\u003e\n\u003cli\u003eSet contains four plinths\u003c\/li\u003e\n\u003cli\u003eFinish: sprayed as one batch, which is why a set matches and three separate orders do not\u003c\/li\u003e\n\u003cli\u003eSaving against buying them singly: about 10 per cent\u003c\/li\u003e\n\u003cli\u003eNests for storage\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eExtra plinths can be added later and we keep the batch record for five years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour plinths, flat packed\u003c\/li\u003e\n\u003cli\u003eLevelling feet for every plinth\u003c\/li\u003e\n\u003cli\u003eAn access panel in each with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 100ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003cli\u003eA layout card with three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785469595980,"sku":"PLS-PST-024-ST","price":2674.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785469628748,"sku":"PLS-PST-024-CT","price":2824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Four_Nesting_Plinths_600mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126065"},{"product_id":"shop-window-package-in-matt-black-lacquer","title":"Shop Window Package in Matt Black Lacquer","description":"\u003cp\u003eEverything needed for a single shop window of about 2 by 1.5 metres, in one delivery and one finish batch. Sized on our standard module so it groups, stacks and rearranges rather than being a set of unrelated objects.\u003c\/p\u003e\u003cp\u003eRetail display is judged on how quickly it can be changed. A window that takes two people a whole morning to reset gets reset less often than it should, and a shop floor that has to be dismantled to change a plinth height stops being changed at all. Everything here is sized to a common module so it stacks and groups, and everything over 900mm is on concealed glides so one person can move it across a floor without lifting it or marking the boards.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: footprints of 300, 400 and 600mm square, heights on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eDisplay surface: as the individual pieces, listed below\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on braced frames, lock jointed, with concealed glides on the tall pieces\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed as one batch\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the individual pieces, all rated for retail use\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: locks fitted where the package includes a case, keyed alike\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 96.0 kilograms in total\u003c\/li\u003e\n\u003cli\u003eContents: three graduated plinths at 400mm square, two risers at 300mm square, one 600mm low plinth, two acrylic covers, a set of felt display pads\u003c\/li\u003e\n\u003cli\u003eModule: everything is on the same footprint ladder so it groups\u003c\/li\u003e\n\u003cli\u003eSaving against buying the pieces separately: about 12 per cent\u003c\/li\u003e\n\u003cli\u003eBatch record kept for five years so you can add matching pieces\u003c\/li\u003e\n\u003cli\u003eOne delivery slot, two person delivery to the shop floor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree graduated plinths at 400mm square\u003c\/li\u003e\n\u003cli\u003eTwo risers at 300mm square\u003c\/li\u003e\n\u003cli\u003eOne 600mm low plinth\u003c\/li\u003e\n\u003cli\u003eTwo acrylic covers\u003c\/li\u003e\n\u003cli\u003eA set of felt display pads\u003c\/li\u003e\n\u003cli\u003eLevelling feet and concealed glides where they apply\u003c\/li\u003e\n\u003cli\u003eTouch up paint in the exact batch\u003c\/li\u003e\n\u003cli\u003eOne hex key and one spanner for the whole package\u003c\/li\u003e\n\u003cli\u003eA layout card with arrangements that work in the stated area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785470087500,"sku":"PLS-RET-002-ST","price":1374.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785470120268,"sku":"PLS-RET-002-CT","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Shop_Window_Package_in_Matt_Black_Lacquer.jpg?v=1789126072"},{"product_id":"pop-up-and-market-stall-package-in-matt-black-lacquer","title":"Pop Up and Market Stall Package in Matt Black Lacquer","description":"\u003cp\u003eEverything needed for a pop up or a market stall, sized to fit in an estate car and build in half an hour, in one delivery and one finish batch. Sized on our standard module so it groups, stacks and rearranges rather than being a set of unrelated objects.\u003c\/p\u003e\u003cp\u003eRetail display is judged on how quickly it can be changed. A window that takes two people a whole morning to reset gets reset less often than it should, and a shop floor that has to be dismantled to change a plinth height stops being changed at all. Everything here is sized to a common module so it stacks and groups, and everything over 900mm is on concealed glides so one person can move it across a floor without lifting it or marking the boards.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: footprints of 300, 400 and 600mm square, heights on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eDisplay surface: as the individual pieces, listed below\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on braced frames, lock jointed, with concealed glides on the tall pieces\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed as one batch\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the individual pieces, all rated for retail use\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: locks fitted where the package includes a case, keyed alike\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 88.0 kilograms in total\u003c\/li\u003e\n\u003cli\u003eContents: four nesting plinths, two collapsible risers, one folding counter, two acrylic covers, a wheeled transport bag for the lot\u003c\/li\u003e\n\u003cli\u003eModule: everything is on the same footprint ladder so it groups\u003c\/li\u003e\n\u003cli\u003eSaving against buying the pieces separately: about 12 per cent\u003c\/li\u003e\n\u003cli\u003eBatch record kept for five years so you can add matching pieces\u003c\/li\u003e\n\u003cli\u003eOne delivery slot, two person delivery to the shop floor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour nesting plinths\u003c\/li\u003e\n\u003cli\u003eTwo collapsible risers\u003c\/li\u003e\n\u003cli\u003eOne folding counter\u003c\/li\u003e\n\u003cli\u003eTwo acrylic covers\u003c\/li\u003e\n\u003cli\u003eA wheeled transport bag for the lot\u003c\/li\u003e\n\u003cli\u003eLevelling feet and concealed glides where they apply\u003c\/li\u003e\n\u003cli\u003eTouch up paint in the exact batch\u003c\/li\u003e\n\u003cli\u003eOne hex key and one spanner for the whole package\u003c\/li\u003e\n\u003cli\u003eA layout card with arrangements that work in the stated area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785471070540,"sku":"PLS-RET-011-ST","price":1224.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785471103308,"sku":"PLS-RET-011-CT","price":1299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Pop_Up_and_Market_Stall_Package_in_Matt_Black_Lacquer.jpg?v=1789126090"},{"product_id":"gallery-opening-package-in-matt-black-lacquer","title":"Gallery Opening Package in Matt Black Lacquer","description":"\u003cp\u003eEverything needed for a small gallery furnishing a first show, plinths and a case in one order, in one delivery and one finish batch. Sized on our standard module so it groups, stacks and rearranges rather than being a set of unrelated objects.\u003c\/p\u003e\u003cp\u003eRetail display is judged on how quickly it can be changed. A window that takes two people a whole morning to reset gets reset less often than it should, and a shop floor that has to be dismantled to change a plinth height stops being changed at all. Everything here is sized to a common module so it stacks and groups, and everything over 900mm is on concealed glides so one person can move it across a floor without lifting it or marking the boards.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: footprints of 300, 400 and 600mm square, heights on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eDisplay surface: as the individual pieces, listed below\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm on braced frames, lock jointed, with concealed glides on the tall pieces\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it, sprayed as one batch\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the individual pieces, all rated for retail use\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: locks fitted where the package includes a case, keyed alike\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 168.0 kilograms in total\u003c\/li\u003e\n\u003cli\u003eContents: set of five graduated plinths, set of three plinths at one height, one freestanding vitrine at 600mm square, two low wide plinths, touch up paint and a batch record\u003c\/li\u003e\n\u003cli\u003eModule: everything is on the same footprint ladder so it groups\u003c\/li\u003e\n\u003cli\u003eSaving against buying the pieces separately: about 12 per cent\u003c\/li\u003e\n\u003cli\u003eBatch record kept for five years so you can add matching pieces\u003c\/li\u003e\n\u003cli\u003eOne delivery slot, two person delivery to the shop floor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSet of five graduated plinths\u003c\/li\u003e\n\u003cli\u003eSet of three plinths at one height\u003c\/li\u003e\n\u003cli\u003eOne freestanding vitrine at 600mm square\u003c\/li\u003e\n\u003cli\u003eTwo low wide plinths\u003c\/li\u003e\n\u003cli\u003eTouch up paint and a batch record\u003c\/li\u003e\n\u003cli\u003eLevelling feet and concealed glides where they apply\u003c\/li\u003e\n\u003cli\u003eTouch up paint in the exact batch\u003c\/li\u003e\n\u003cli\u003eOne hex key and one spanner for the whole package\u003c\/li\u003e\n\u003cli\u003eA layout card with arrangements that work in the stated area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785471365452,"sku":"PLS-RET-014-ST","price":2499.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785471398220,"sku":"PLS-RET-014-CT","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Gallery_Opening_Package_in_Matt_Black_Lacquer.jpg?v=1789126070"},{"product_id":"four-bay-collection-display-wall-1200mm-wide-in-matt-black-lacquer","title":"Four Bay Collection Display Wall 1200mm Wide in Matt Black Lacquer","description":"\u003cp\u003eA modular glazed display wall for a wall of small objects, models or ceramics, in four lockable glazed bays. Every bay is 600mm wide, lockable and individually lit, and the whole thing comes apart into single bays for a move.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 350mm deep by 1900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 4 bays, each 600mm wide with three adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003eConstruction: modular carcasses bolted together, each one a single bay\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg per shelf, 60kg per bay\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: each bay locks independently, keyed alike across the wall\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 82.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBays: 4, each independently lockable\u003c\/li\u003e\n\u003cli\u003eShelves: three adjustable glass shelves per bay, on a 32mm pitch\u003c\/li\u003e\n\u003cli\u003eLighting: a warm white LED strip in the top of every bay, plug in, dimmable\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm toughened doors, choose low iron at order\u003c\/li\u003e\n\u003cli\u003eComes apart into single bays, none over 30 kilograms\u003c\/li\u003e\n\u003cli\u003eAnti tip: a top restraint per bay, supplied, and it does need using\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour bay carcasses, flat packed\u003c\/li\u003e\n\u003cli\u003e12 adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003e4 glazed lockable doors with keys\u003c\/li\u003e\n\u003cli\u003eAn LED strip and a plug in driver for every bay\u003c\/li\u003e\n\u003cli\u003eConnecting bolts, levelling feet and top restraints\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785472741708,"sku":"PLS-CDW-002-TG","price":1424.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785472774476,"sku":"PLS-CDW-002-LI","price":1674.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Four_Bay_Collection_Display_Wall_1200mm_Wide_in_Matt_Black_Lacquer.jpg?v=1789057396"},{"product_id":"eight-bay-collection-display-wall-2400mm-wide-in-matt-black-lacquer","title":"Eight Bay Collection Display Wall 2400mm Wide in Matt Black Lacquer","description":"\u003cp\u003eA modular glazed display wall for a full wall in modules that come apart, so it fits in a lift and up a staircase. Every bay is 600mm wide, lockable and individually lit, and the whole thing comes apart into single bays for a move.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide by 350mm deep by 1900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 8 bays, each 600mm wide with three adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003eConstruction: modular carcasses bolted together, each one a single bay\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg per shelf, 60kg per bay\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: each bay locks independently, keyed alike across the wall\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 152.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBays: 8, each independently lockable\u003c\/li\u003e\n\u003cli\u003eShelves: three adjustable glass shelves per bay, on a 32mm pitch\u003c\/li\u003e\n\u003cli\u003eLighting: a warm white LED strip in the top of every bay, plug in, dimmable\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm toughened doors, choose low iron at order\u003c\/li\u003e\n\u003cli\u003eComes apart into single bays, none over 30 kilograms\u003c\/li\u003e\n\u003cli\u003eAnti tip: a top restraint per bay, supplied, and it does need using\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight bay carcasses, flat packed\u003c\/li\u003e\n\u003cli\u003e24 adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003e8 glazed lockable doors with keys\u003c\/li\u003e\n\u003cli\u003eAn LED strip and a plug in driver for every bay\u003c\/li\u003e\n\u003cli\u003eConnecting bolts, levelling feet and top restraints\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785473528140,"sku":"PLS-CDW-010-TG","price":2499.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785473560908,"sku":"PLS-CDW-010-LI","price":2949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Eight_Bay_Collection_Display_Wall_2400mm_Wide_in_Matt_Black_Lacquer.jpg?v=1789057390"},{"product_id":"six-bay-watch-and-small-object-display-wall-in-matt-black-lacquer","title":"Six Bay Watch and Small Object Display Wall in Matt Black Lacquer","description":"\u003cp\u003eA modular glazed display wall for shallow bays with close shelf spacing and individual bay locks, sized around a watch box rather than around a shelf. Every bay is 600mm wide, lockable and individually lit, and the whole thing comes apart into single bays for a move.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 350mm deep by 1900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 6 bays, each 600mm wide with three adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003eConstruction: modular carcasses bolted together, each one a single bay\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg per shelf, 60kg per bay\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: each bay locks independently, keyed alike across the wall\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 104.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBays: 6, each independently lockable\u003c\/li\u003e\n\u003cli\u003eShelves: three adjustable glass shelves per bay, on a 32mm pitch\u003c\/li\u003e\n\u003cli\u003eLighting: a warm white LED strip in the top of every bay, plug in, dimmable\u003c\/li\u003e\n\u003cli\u003eGlass: 5mm toughened doors, choose low iron at order\u003c\/li\u003e\n\u003cli\u003eComes apart into single bays, none over 30 kilograms\u003c\/li\u003e\n\u003cli\u003eAnti tip: a top restraint per bay, supplied, and it does need using\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix bay carcasses, flat packed\u003c\/li\u003e\n\u003cli\u003e18 adjustable glass shelves\u003c\/li\u003e\n\u003cli\u003e6 glazed lockable doors with keys\u003c\/li\u003e\n\u003cli\u003eAn LED strip and a plug in driver for every bay\u003c\/li\u003e\n\u003cli\u003eConnecting bolts, levelling feet and top restraints\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785474543948,"sku":"PLS-CDW-021-TG","price":1824.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785474576716,"sku":"PLS-CDW-021-LI","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Six_Bay_Watch_and_Small_Object_Display_Wall_in_Matt_Black_Lacquer.jpg?v=1789126165"},{"product_id":"display-plinth-300mm-by-300mm-by-600mm-high-in-matt-black-lacquer","title":"Display Plinth 300mm by 300mm by 600mm High in Matt Black Lacquer","description":"\u003cp\u003eA 300mm square plinth at 600mm tall, in matt black lacquer. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.9 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478148428,"sku":"PLS-PLI-051-ST","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478181196,"sku":"PLS-PLI-051-CT","price":409.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_600mm_High_in_Matt_Black_Lacquer.jpg?v=1789057367"},{"product_id":"display-plinth-300mm-by-300mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 300mm by 300mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 300mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478443340,"sku":"PLS-PLI-055-ST","price":489.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478476108,"sku":"PLS-PLI-055-CT","price":519.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057367"},{"product_id":"display-plinth-300mm-by-300mm-by-1100mm-high-in-matt-black-lacquer","title":"Display Plinth 300mm by 300mm by 1100mm High in Matt Black Lacquer","description":"\u003cp\u003eA 300mm square plinth at 1100mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 210kg evenly distributed, 105kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 23.0 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785478902092,"sku":"PLS-PLI-059-ST","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785478934860,"sku":"PLS-PLI-059-CT","price":589.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_300mm_by_300mm_by_1100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057367"},{"product_id":"display-plinth-400mm-by-400mm-by-600mm-high-in-matt-black-lacquer","title":"Display Plinth 400mm by 400mm by 600mm High in Matt Black Lacquer","description":"\u003cp\u003eA 400mm square plinth at 600mm tall, in matt black lacquer. A low plinth, for something you want people to look down into.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 600mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.1 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479393612,"sku":"PLS-PLI-063-ST","price":469.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479426380,"sku":"PLS-PLI-063-CT","price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_600mm_High_in_Matt_Black_Lacquer.jpg?v=1789057364"},{"product_id":"display-plinth-400mm-by-400mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 400mm by 400mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 400mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 400mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 260kg evenly distributed, 130kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 25.6 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785479688524,"sku":"PLS-PLI-067-ST","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785479721292,"sku":"PLS-PLI-067-CT","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_400mm_by_400mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057371"},{"product_id":"display-plinth-500mm-by-500mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 500mm by 500mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 500mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 31.7 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480704332,"sku":"PLS-PLI-078-ST","price":739.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480737100,"sku":"PLS-PLI-078-CT","price":789.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057368"},{"product_id":"display-plinth-500mm-by-500mm-by-1100mm-high-in-matt-black-lacquer","title":"Display Plinth 500mm by 500mm by 1100mm High in Matt Black Lacquer","description":"\u003cp\u003eA 500mm square plinth at 1100mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 500mm deep by 1100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 500mm by 500mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 310kg evenly distributed, 155kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.1 kilograms\u003c\/li\u003e\n\u003cli\u003eBallasted base on anything over 900mm tall\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785480966476,"sku":"PLS-PLI-082-ST","price":859.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785480999244,"sku":"PLS-PLI-082-CT","price":909.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_500mm_by_500mm_by_1100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057372"},{"product_id":"display-plinth-600mm-by-600mm-by-400mm-high-in-matt-black-lacquer","title":"Display Plinth 600mm by 600mm by 400mm High in Matt Black Lacquer","description":"\u003cp\u003eA 600mm square plinth at 400mm tall, in matt black lacquer. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 21.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785481720140,"sku":"PLS-PLI-085-ST","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785481752908,"sku":"PLS-PLI-085-CT","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_400mm_High_in_Matt_Black_Lacquer.jpg?v=1789057377"},{"product_id":"display-plinth-600mm-by-600mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 600mm by 600mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 600mm square plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 600mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 600mm by 600mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 360kg evenly distributed, 180kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 38.0 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482146124,"sku":"PLS-PLI-089-ST","price":879.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482178892,"sku":"PLS-PLI-089-CT","price":929.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_600mm_by_600mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057369"},{"product_id":"display-plinth-800mm-by-400mm-by-900mm-high-in-matt-black-lacquer","title":"Display Plinth 800mm by 400mm by 900mm High in Matt Black Lacquer","description":"\u003cp\u003eA 800 by 400mm plinth at 900mm tall, in matt black lacquer. Standard gallery height, which puts a small object at eye level.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 800mm wide by 400mm deep by 900mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 800mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 37.5 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482539340,"sku":"PLS-PLI-094-ST","price":869.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482572108,"sku":"PLS-PLI-094-CT","price":919.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_800mm_by_400mm_by_900mm_High_in_Matt_Black_Lacquer.jpg?v=1789057382"},{"product_id":"display-plinth-1200mm-by-400mm-by-400mm-high-in-matt-black-lacquer","title":"Display Plinth 1200mm by 400mm by 400mm High in Matt Black Lacquer","description":"\u003cp\u003eA 1200 by 400mm plinth at 400mm tall, in matt black lacquer. Low and wide, for a group of objects or a single large one.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 400mm deep by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 1200mm by 400mm, flat within 0.5mm across the diagonal\u003c\/li\u003e\n\u003cli\u003eConstruction: 18mm moisture resistant MDF on a braced internal frame, lock jointed at every corner\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 400kg evenly distributed, 200kg point load in the centre\u003c\/li\u003e\n\u003cli\u003eLevelling: four M10 levelling feet with 20mm of travel, recessed so nothing shows and nothing catches a toe\u003c\/li\u003e\n\u003cli\u003eSecurity: no lock, this is an open plinth\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed, two person delivery to the room, packaging taken away on the same visit if you ask when you book\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 27.8 kilograms\u003c\/li\u003e\n\u003cli\u003eHollow, and it can be weighted through the access panel\u003c\/li\u003e\n\u003cli\u003eAccess panel in the back for cable, weight or a lock\u003c\/li\u003e\n\u003cli\u003eCorner detail: lock jointed, not mitred, so it survives a move\u003c\/li\u003e\n\u003cli\u003eTouch up paint supplied in the exact batch\u003c\/li\u003e\n\u003cli\u003eCut to a non standard height for 6 per cent more, chosen at order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe plinth, flat packed\u003c\/li\u003e\n\u003cli\u003eFour levelling feet\u003c\/li\u003e\n\u003cli\u003eA removable access panel with a captive fixing\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish for touching up\u003c\/li\u003e\n\u003cli\u003eA hex key, a spanner and printed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eIt arrives flat packed with a hex key, a spanner and printed instructions. Fittings are cam locks into steel inserts rather than screws into board, so it comes apart for a move and goes back together square. Level it on the feet before anything goes on top, and check it with a level across both diagonals rather than along the front, because a gallery floor is almost never flat and a plinth that follows the floor is the thing everybody notices and nobody can name.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785482932556,"sku":"PLS-PLI-100-ST","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785482965324,"sku":"PLS-PLI-100-CT","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Plinth_1200mm_by_400mm_by_400mm_High_in_Matt_Black_Lacquer.jpg?v=1789057388"},{"product_id":"display-riser-150mm-square-by-100mm-high-in-matt-black-lacquer","title":"Display Riser 150mm Square by 100mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 150mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square by 100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483620684,"sku":"PLS-RIS-002-ST","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483653452,"sku":"PLS-RIS-002-CT","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_150mm_Square_by_100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057388"},{"product_id":"display-riser-150mm-square-by-200mm-high-in-matt-black-lacquer","title":"Display Riser 150mm Square by 200mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 150mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square by 200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483751756,"sku":"PLS-RIS-004-ST","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483784524,"sku":"PLS-RIS-004-CT","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_150mm_Square_by_200mm_High_in_Matt_Black_Lacquer.jpg?v=1789057389"},{"product_id":"display-riser-200mm-square-by-150mm-high-in-matt-black-lacquer","title":"Display Riser 200mm Square by 150mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 200mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square by 150mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483882828,"sku":"PLS-RIS-006-ST","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483915596,"sku":"PLS-RIS-006-CT","price":64.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_200mm_Square_by_150mm_High_in_Matt_Black_Lacquer.jpg?v=1789057386"},{"product_id":"display-riser-200mm-square-by-300mm-high-in-matt-black-lacquer","title":"Display Riser 200mm Square by 300mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 200mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square by 300mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484013900,"sku":"PLS-RIS-008-ST","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484046668,"sku":"PLS-RIS-008-CT","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_200mm_Square_by_300mm_High_in_Matt_Black_Lacquer.jpg?v=1789057386"},{"product_id":"display-riser-300mm-square-by-200mm-high-in-matt-black-lacquer","title":"Display Riser 300mm Square by 200mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 300mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm square by 200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484276044,"sku":"PLS-RIS-010-ST","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484308812,"sku":"PLS-RIS-010-CT","price":94.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_300mm_Square_by_200mm_High_in_Matt_Black_Lacquer.jpg?v=1789057387"},{"product_id":"display-riser-300mm-square-by-400mm-high-in-matt-black-lacquer","title":"Display Riser 300mm Square by 400mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 300mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm square by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484439884,"sku":"PLS-RIS-012-ST","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484472652,"sku":"PLS-RIS-012-CT","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_300mm_Square_by_400mm_High_in_Matt_Black_Lacquer.jpg?v=1789057388"},{"product_id":"set-of-three-graduated-risers-150mm-square-in-matt-black-lacquer","title":"Set of Three Graduated Risers 150mm Square in Matt Black Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484570956,"sku":"PLS-RIS-014-ST","price":139.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484603724,"sku":"PLS-RIS-014-CT","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Graduated_Risers_150mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126066"},{"product_id":"set-of-five-graduated-risers-200mm-square-in-matt-black-lacquer","title":"Set of Five Graduated Risers 200mm Square in Matt Black Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484964172,"sku":"PLS-RIS-016-ST","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484996940,"sku":"PLS-RIS-016-CT","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Five_Graduated_Risers_200mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126065"},{"product_id":"tabletop-display-case-300mm-by-300mm-by-300mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 300mm by 300mm by 300mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a single small object, a model or a piece of jewellery. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm wide by 300mm deep by 300mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 280mm by 280mm by 240mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785488535884,"sku":"PLS-TDC-002-TG","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785488568652,"sku":"PLS-TDC-002-LI","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785488601420,"sku":"PLS-TDC-002-UV","price":329.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_300mm_by_300mm_by_300mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126168"},{"product_id":"tabletop-display-case-400mm-by-400mm-by-400mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 400mm by 400mm by 400mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a helmet, a vase or a group of small objects. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm wide by 400mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 380mm by 380mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785488830796,"sku":"PLS-TDC-005-TG","price":329.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785488863564,"sku":"PLS-TDC-005-LI","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785488896332,"sku":"PLS-TDC-005-UV","price":439.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_400mm_by_400mm_by_400mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126168"},{"product_id":"tabletop-display-case-500mm-by-300mm-by-400mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 500mm by 300mm by 400mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a wide shallow case for a model, a knife or a fossil. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm wide by 300mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 480mm by 280mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785489125708,"sku":"PLS-TDC-008-TG","price":349.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785489158476,"sku":"PLS-TDC-008-LI","price":419.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785489191244,"sku":"PLS-TDC-008-UV","price":469.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_500mm_by_300mm_by_400mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126168"},{"product_id":"tabletop-display-case-600mm-by-400mm-by-500mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 600mm by 400mm by 500mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a larger object, or a group arranged on a deck. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 400mm deep by 500mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 580mm by 380mm by 440mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 18.4 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785489944908,"sku":"PLS-TDC-011-TG","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785489977676,"sku":"PLS-TDC-011-LI","price":539.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490010444,"sku":"PLS-TDC-011-UV","price":609.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_600mm_by_400mm_by_500mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126167"},{"product_id":"tabletop-display-case-800mm-by-400mm-by-400mm-high-with-a-matt-black-lacquer-base","title":"Tabletop Display Case 800mm by 400mm by 400mm High with a Matt Black Lacquer Base","description":"\u003cp\u003eA glass case on a matt black lacquer base, sized for a long case, for a model ship, a rifle or a run of small objects in a row. Sits on a table, a shelf or the top of one of our plinths.\u003c\/p\u003e\u003cp\u003eA vitrine is a box that has to disappear. Everything we do to one is aimed at that: low iron glass because ordinary float glass has a green cast that shows on every edge, mitred and polished glass corners rather than an aluminium post, and a base sized so the glass sits proud of it rather than inside a visible rebate. The unglamorous half is the part that keeps the object safe. Dust gets in through the base, not the top, so every case here has a gasketed base and a felt sealed door, which is the single biggest thing you can do for anything that has to stay clean for ten years.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 800mm wide by 400mm deep by 400mm high overall\u003c\/li\u003e\n\u003cli\u003eDisplay surface: internal display area 780mm by 380mm by 340mm\u003c\/li\u003e\n\u003cli\u003eConstruction: solid base with a rebated glass seat, glass mitred and polished at the vertical corners\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 65kg on the deck\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base\u003c\/li\u003e\n\u003cli\u003eSecurity: a cam lock is available as an option\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton, assembled, the glass in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.6 kilograms\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm, mitred and polished, choose the specification at order\u003c\/li\u003e\n\u003cli\u003eTop lifts off, and it needs two hands on anything over 500mm\u003c\/li\u003e\n\u003cli\u003eDust: a felt seated rebate, which is what keeps it clean\u003c\/li\u003e\n\u003cli\u003eBase height: 60mm, sprayed on all faces\u003c\/li\u003e\n\u003cli\u003eSits on a plinth top, and our 300 and 400mm plinths are sized for these\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe base, assembled and sprayed\u003c\/li\u003e\n\u003cli\u003eThe glass case in a fitted cradle\u003c\/li\u003e\n\u003cli\u003eA felt seating strip, fitted\u003c\/li\u003e\n\u003cli\u003eFelt pads for the base and a spare set\u003c\/li\u003e\n\u003cli\u003eA microfibre cloth and a care note\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eThe base arrives flat packed and the glass arrives assembled in its own crate. Build and level the base first, then two people lift the glass on. Do not lift a glass case by the top rail. The gasket seats itself under the weight of the glass, so leave it for an hour before you load the case and check the door line again after a day.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eSize the case to the object plus the space around it rather than to the object. A rule that works well is a clear 100mm at the sides and 150mm above for anything under half a metre, and more for anything a visitor will walk around. Think about the door before you buy: a hinged door needs swing space and a lift off top needs two people and somewhere to put a large piece of glass. If the case will hold anything light sensitive, take the UV filtering glass, and keep the light level at 50 lux for works on paper and textiles and 150 lux for oil, wood and most other things.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Toughened float glass","offer_id":58785490403660,"sku":"PLS-TDC-014-TG","price":559.0,"currency_code":"GBP","in_stock":true},{"title":"Low iron glass, no green edge","offer_id":58785490436428,"sku":"PLS-TDC-014-LI","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"Laminated UV filtering glass","offer_id":58785490469196,"sku":"PLS-TDC-014-UV","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Tabletop_Display_Case_800mm_by_400mm_by_400mm_High_with_a_Matt_Black_Lacquer_Base.jpg?v=1789126155"},{"product_id":"wall-mounted-display-shelf-600mm-in-matt-black-lacquer","title":"Wall Mounted Display Shelf 600mm in Matt Black Lacquer","description":"\u003cp\u003eA shelf with a concealed steel frame and no visible bracket, so what you see is the object and a line.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length, 150mm deep\u003c\/li\u003e\n\u003cli\u003eDisplay surface: flat and sprayed on every visible face including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: concealed welded steel frame, machined into the panel\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable, this fixes to a wall\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eFixing: concealed, 2 wall fixings, masonry pack supplied\u003c\/li\u003e\n\u003cli\u003ePlasterboard on dabs: a long fixing pack is free on request\u003c\/li\u003e\n\u003cli\u003eNo visible bracket, which is the whole point\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template is in the box\u003c\/li\u003e\n\u003cli\u003eLevelling: check across the length, not against the ceiling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe wall mounted display shelf 600mm\u003c\/li\u003e\n\u003cli\u003eA concealed steel frame, machined in\u003c\/li\u003e\n\u003cli\u003eMasonry fixings, with a plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eMark from the template rather than from the piece, drill, fix the frame and check it for level in both directions before the shelf goes on. That last check is the whole job.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785492042060,"sku":"PLS-WMD-002-ST","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785492074828,"sku":"PLS-WMD-002-CT","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Wall_Mounted_Display_Shelf_600mm_in_Matt_Black_Lacquer.jpg?v=1789126165"},{"product_id":"wall-mounted-display-shelf-900mm-in-matt-black-lacquer","title":"Wall Mounted Display Shelf 900mm in Matt Black Lacquer","description":"\u003cp\u003eThe longer shelf, which needs three fixings rather than two and gets them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length, 150mm deep\u003c\/li\u003e\n\u003cli\u003eDisplay surface: flat and sprayed on every visible face including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: concealed welded steel frame, machined into the panel\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable, this fixes to a wall\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.4 kilograms\u003c\/li\u003e\n\u003cli\u003eFixing: concealed, 3 wall fixings, masonry pack supplied\u003c\/li\u003e\n\u003cli\u003ePlasterboard on dabs: a long fixing pack is free on request\u003c\/li\u003e\n\u003cli\u003eNo visible bracket, which is the whole point\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template is in the box\u003c\/li\u003e\n\u003cli\u003eLevelling: check across the length, not against the ceiling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe wall mounted display shelf 900mm\u003c\/li\u003e\n\u003cli\u003eA concealed steel frame, machined in\u003c\/li\u003e\n\u003cli\u003eMasonry fixings, with a plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eMark from the template rather than from the piece, drill, fix the frame and check it for level in both directions before the shelf goes on. That last check is the whole job.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785492205900,"sku":"PLS-WMD-004-ST","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785492238668,"sku":"PLS-WMD-004-CT","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Wall_Mounted_Display_Shelf_900mm_in_Matt_Black_Lacquer.jpg?v=1789126157"},{"product_id":"wall-mounted-glazed-display-box-400mm-in-matt-black-lacquer","title":"Wall Mounted Glazed Display Box 400mm in Matt Black Lacquer","description":"\u003cp\u003eA glazed box on the wall, which is the cheapest way to protect a small object properly.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length, 200mm deep\u003c\/li\u003e\n\u003cli\u003eDisplay surface: flat and sprayed on every visible face including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: concealed welded steel frame, machined into the panel\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 15kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable, this fixes to a wall\u003c\/li\u003e\n\u003cli\u003eSecurity: cam lock fitted on the glazed boxes\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.6 kilograms\u003c\/li\u003e\n\u003cli\u003eFixing: concealed, 2 wall fixings, masonry pack supplied\u003c\/li\u003e\n\u003cli\u003ePlasterboard on dabs: a long fixing pack is free on request\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm toughened, two adjustable shelves\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template is in the box\u003c\/li\u003e\n\u003cli\u003eLevelling: check across the length, not against the ceiling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe wall mounted glazed display box 400mm\u003c\/li\u003e\n\u003cli\u003eA concealed steel frame, machined in\u003c\/li\u003e\n\u003cli\u003eMasonry fixings, with a plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA cam lock with two keys\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eMark from the template rather than from the piece, drill, fix the frame and check it for level in both directions before the shelf goes on. That last check is the whole job.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785492500812,"sku":"PLS-WMD-006-ST","price":349.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785492533580,"sku":"PLS-WMD-006-CT","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Wall_Mounted_Glazed_Display_Box_400mm_in_Matt_Black_Lacquer.jpg?v=1789126157"},{"product_id":"wall-mounted-glazed-display-box-600mm-in-matt-black-lacquer","title":"Wall Mounted Glazed Display Box 600mm in Matt Black Lacquer","description":"\u003cp\u003eThe larger wall box, with two adjustable glass shelves.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length, 200mm deep\u003c\/li\u003e\n\u003cli\u003eDisplay surface: flat and sprayed on every visible face including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: concealed welded steel frame, machined into the panel\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 15kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable, this fixes to a wall\u003c\/li\u003e\n\u003cli\u003eSecurity: cam lock fitted on the glazed boxes\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.4 kilograms\u003c\/li\u003e\n\u003cli\u003eFixing: concealed, 2 wall fixings, masonry pack supplied\u003c\/li\u003e\n\u003cli\u003ePlasterboard on dabs: a long fixing pack is free on request\u003c\/li\u003e\n\u003cli\u003eGlass: 4mm toughened, two adjustable shelves\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template is in the box\u003c\/li\u003e\n\u003cli\u003eLevelling: check across the length, not against the ceiling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe wall mounted glazed display box 600mm\u003c\/li\u003e\n\u003cli\u003eA concealed steel frame, machined in\u003c\/li\u003e\n\u003cli\u003eMasonry fixings, with a plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA cam lock with two keys\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eMark from the template rather than from the piece, drill, fix the frame and check it for level in both directions before the shelf goes on. That last check is the whole job.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785492992332,"sku":"PLS-WMD-008-ST","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785493025100,"sku":"PLS-WMD-008-CT","price":479.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Wall_Mounted_Glazed_Display_Box_600mm_in_Matt_Black_Lacquer.jpg?v=1789126165"},{"product_id":"wall-mounted-picture-ledge-900mm-in-matt-black-lacquer","title":"Wall Mounted Picture Ledge 900mm in Matt Black Lacquer","description":"\u003cp\u003eA ledge for leaning framed work, at 90mm deep with a 22mm lip, which is the proportion that holds an A2 frame.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name for the length, 150mm deep\u003c\/li\u003e\n\u003cli\u003eDisplay surface: flat and sprayed on every visible face including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: concealed welded steel frame, machined into the panel\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eLevelling: not applicable, this fixes to a wall\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: one carton\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.6 kilograms\u003c\/li\u003e\n\u003cli\u003eFixing: concealed, 3 wall fixings, masonry pack supplied\u003c\/li\u003e\n\u003cli\u003ePlasterboard on dabs: a long fixing pack is free on request\u003c\/li\u003e\n\u003cli\u003eNo visible bracket, which is the whole point\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template is in the box\u003c\/li\u003e\n\u003cli\u003eLevelling: check across the length, not against the ceiling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe wall mounted picture ledge 900mm\u003c\/li\u003e\n\u003cli\u003eA concealed steel frame, machined in\u003c\/li\u003e\n\u003cli\u003eMasonry fixings, with a plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eMark from the template rather than from the piece, drill, fix the frame and check it for level in both directions before the shelf goes on. That last check is the whole job.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eTwo rules cover most of it. The top of a plinth should be a little smaller than the footprint of the object, not larger, because a visible margin of empty plinth reads as a mistake and an object that slightly overhangs reads as deliberate. And the height should put the centre of the work between 1300 and 1500mm off the floor, which is eye level for most people standing at a comfortable viewing distance. For a small object that means a tall plinth, which people resist and should not. If in doubt, send us the dimensions and weight of the piece and we will tell you the size we would use.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785494860108,"sku":"PLS-WMD-012-ST","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785494892876,"sku":"PLS-WMD-012-CT","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Wall_Mounted_Picture_Ledge_900mm_in_Matt_Black_Lacquer.jpg?v=1789126160"}],"url":"https:\/\/plinthstudiostore.com\/collections\/matt-black-lacquer.oembed","provider":"Plinth Studio","version":"1.0","type":"link"}