{"title":"Risers and Blocks","description":"\u003cp\u003eThe small pieces that do most of the work inside a case or a window: acrylic and lacquered blocks, stepped risers, wedges and cradles.\u003c\/p\u003e\u003cp\u003eUsed well, a riser buys you the height a plinth cannot — it lifts one object out of a group without changing the plinth under all of them. Keep 100mm of clear plate around whatever sits on top, and remember that acrylic arrives filmed on both faces: leave the film on until the piece is in position.\u003c\/p\u003e","products":[{"product_id":"display-riser-150mm-square-by-100mm-high-in-gallery-white-lacquer","title":"Display Riser 150mm Square by 100mm High in Gallery White Lacquer","description":"\u003cp\u003eA solid block at 150mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square by 100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483424076,"sku":"PLS-RIS-001-ST","price":41.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483456844,"sku":"PLS-RIS-001-CT","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_150mm_Square_by_100mm_High_in_Gallery_White_Lacquer.jpg?v=1789057393"},{"product_id":"display-riser-150mm-square-by-100mm-high-in-matt-black-lacquer","title":"Display Riser 150mm Square by 100mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 150mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square by 100mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483620684,"sku":"PLS-RIS-002-ST","price":42.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483653452,"sku":"PLS-RIS-002-CT","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_150mm_Square_by_100mm_High_in_Matt_Black_Lacquer.jpg?v=1789057388"},{"product_id":"display-riser-150mm-square-by-200mm-high-in-gallery-white-lacquer","title":"Display Riser 150mm Square by 200mm High in Gallery White Lacquer","description":"\u003cp\u003eA solid block at 150mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square by 200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483686220,"sku":"PLS-RIS-003-ST","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483718988,"sku":"PLS-RIS-003-CT","price":54.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_150mm_Square_by_200mm_High_in_Gallery_White_Lacquer.jpg?v=1789057392"},{"product_id":"display-riser-150mm-square-by-200mm-high-in-matt-black-lacquer","title":"Display Riser 150mm Square by 200mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 150mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square by 200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483751756,"sku":"PLS-RIS-004-ST","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483784524,"sku":"PLS-RIS-004-CT","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_150mm_Square_by_200mm_High_in_Matt_Black_Lacquer.jpg?v=1789057389"},{"product_id":"display-riser-200mm-square-by-150mm-high-in-gallery-white-lacquer","title":"Display Riser 200mm Square by 150mm High in Gallery White Lacquer","description":"\u003cp\u003eA solid block at 200mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square by 150mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483817292,"sku":"PLS-RIS-005-ST","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483850060,"sku":"PLS-RIS-005-CT","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_200mm_Square_by_150mm_High_in_Gallery_White_Lacquer.jpg?v=1789057391"},{"product_id":"display-riser-200mm-square-by-150mm-high-in-matt-black-lacquer","title":"Display Riser 200mm Square by 150mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 200mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square by 150mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483882828,"sku":"PLS-RIS-006-ST","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483915596,"sku":"PLS-RIS-006-CT","price":64.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_200mm_Square_by_150mm_High_in_Matt_Black_Lacquer.jpg?v=1789057386"},{"product_id":"display-riser-200mm-square-by-300mm-high-in-gallery-white-lacquer","title":"Display Riser 200mm Square by 300mm High in Gallery White Lacquer","description":"\u003cp\u003eA solid block at 200mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square by 300mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785483948364,"sku":"PLS-RIS-007-ST","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785483981132,"sku":"PLS-RIS-007-CT","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_200mm_Square_by_300mm_High_in_Gallery_White_Lacquer.jpg?v=1789057392"},{"product_id":"display-riser-200mm-square-by-300mm-high-in-matt-black-lacquer","title":"Display Riser 200mm Square by 300mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 200mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square by 300mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484013900,"sku":"PLS-RIS-008-ST","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484046668,"sku":"PLS-RIS-008-CT","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_200mm_Square_by_300mm_High_in_Matt_Black_Lacquer.jpg?v=1789057386"},{"product_id":"display-riser-300mm-square-by-200mm-high-in-gallery-white-lacquer","title":"Display Riser 300mm Square by 200mm High in Gallery White Lacquer","description":"\u003cp\u003eA solid block at 300mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm square by 200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484079436,"sku":"PLS-RIS-009-ST","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484112204,"sku":"PLS-RIS-009-CT","price":94.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_300mm_Square_by_200mm_High_in_Gallery_White_Lacquer.jpg?v=1789057391"},{"product_id":"display-riser-300mm-square-by-200mm-high-in-matt-black-lacquer","title":"Display Riser 300mm Square by 200mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 300mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm square by 200mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484276044,"sku":"PLS-RIS-010-ST","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484308812,"sku":"PLS-RIS-010-CT","price":94.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_300mm_Square_by_200mm_High_in_Matt_Black_Lacquer.jpg?v=1789057387"},{"product_id":"display-riser-300mm-square-by-400mm-high-in-gallery-white-lacquer","title":"Display Riser 300mm Square by 400mm High in Gallery White Lacquer","description":"\u003cp\u003eA solid block at 300mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm square by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484341580,"sku":"PLS-RIS-011-ST","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484374348,"sku":"PLS-RIS-011-CT","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_300mm_Square_by_400mm_High_in_Gallery_White_Lacquer.jpg?v=1789057393"},{"product_id":"display-riser-300mm-square-by-400mm-high-in-matt-black-lacquer","title":"Display Riser 300mm Square by 400mm High in Matt Black Lacquer","description":"\u003cp\u003eA solid block at 300mm square. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm square by 400mm high\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 300mm by 300mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484439884,"sku":"PLS-RIS-012-ST","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484472652,"sku":"PLS-RIS-012-CT","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Display_Riser_300mm_Square_by_400mm_High_in_Matt_Black_Lacquer.jpg?v=1789057388"},{"product_id":"set-of-three-graduated-risers-150mm-square-in-gallery-white-lacquer","title":"Set of Three Graduated Risers 150mm Square in Gallery White Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484505420,"sku":"PLS-RIS-013-ST","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484538188,"sku":"PLS-RIS-013-CT","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Graduated_Risers_150mm_Square_in_Gallery_White_Lacquer.jpg?v=1789126061"},{"product_id":"set-of-three-graduated-risers-150mm-square-in-matt-black-lacquer","title":"Set of Three Graduated Risers 150mm Square in Matt Black Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 150mm by 150mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484570956,"sku":"PLS-RIS-014-ST","price":139.95,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484603724,"sku":"PLS-RIS-014-CT","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Three_Graduated_Risers_150mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126066"},{"product_id":"set-of-five-graduated-risers-200mm-square-in-gallery-white-lacquer","title":"Set of Five Graduated Risers 200mm Square in Gallery White Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm moisture resistant MDF sprayed in a two pack polyurethane to RAL 9010, which is the white almost every gallery in the country paints its walls\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484636492,"sku":"PLS-RIS-015-ST","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484669260,"sku":"PLS-RIS-015-CT","price":279.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Five_Graduated_Risers_200mm_Square_in_Gallery_White_Lacquer.jpg?v=1789126078"},{"product_id":"set-of-five-graduated-risers-200mm-square-in-matt-black-lacquer","title":"Set of Five Graduated Risers 200mm Square in Matt Black Lacquer","description":"\u003cp\u003eThree graduated blocks that group and stack. A riser is the piece that stops a display being flat, and the reason most windows look better after somebody adds three of them.\u003c\/p\u003e\u003cp\u003eA plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm square, heights 100, 200 and 300mm\u003c\/li\u003e\n\u003cli\u003eDisplay surface: 200mm by 200mm, flat and sprayed on all faces including the underside\u003c\/li\u003e\n\u003cli\u003eConstruction: solid laminated core rather than a hollow box, so it does not sound hollow when something is put down on it\u003c\/li\u003e\n\u003cli\u003eFinish: 18mm MDF sprayed in a two pack polyurethane to RAL 9005 in a dead matt, which swallows reflections and is why photographers ask for it\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg point load\u003c\/li\u003e\n\u003cli\u003eLevelling: felt pads on the base, not levelling feet\u003c\/li\u003e\n\u003cli\u003eSecurity: not applicable\u003c\/li\u003e\n\u003cli\u003eDelivery: flat packed in one small carton, or assembled\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSolid core, which is why it costs more than a hollow one and is worth it\u003c\/li\u003e\n\u003cli\u003eSprayed on all six faces, including the underside\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted, spares supplied\u003c\/li\u003e\n\u003cli\u003eStacks with the rest of the riser range on a 100mm ladder\u003c\/li\u003e\n\u003cli\u003eSold as a set of three\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe riser or risers, assembled\u003c\/li\u003e\n\u003cli\u003eFelt pads fitted and a spare set\u003c\/li\u003e\n\u003cli\u003eA 50ml pot of the exact finish\u003c\/li\u003e\n\u003cli\u003eA card showing three arrangements that work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eArrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.\u003c\/p\u003e\u003ch3\u003eSpecifying it\u003c\/h3\u003e\u003cp\u003eBuy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.\u003c\/p\u003e","brand":"Plinth Studio","offers":[{"title":"Standard height","offer_id":58785484964172,"sku":"PLS-RIS-016-ST","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"Cut to your height","offer_id":58785484996940,"sku":"PLS-RIS-016-CT","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8300\/9100\/files\/Set_of_Five_Graduated_Risers_200mm_Square_in_Matt_Black_Lacquer.jpg?v=1789126065"}],"url":"https:\/\/plinthstudiostore.com\/collections\/risers.oembed","provider":"Plinth Studio","version":"1.0","type":"link"}