Anti Tip Strap Set with Making Good Kit

Straps, fixings, filler and touch up paint, so the wall goes back the way it was.

A plinth is a simple object and almost every cheap one gets the same three things wrong. The panel is too thin, so the top deflects under a bronze and you can see it from across the room. The corners are mitred and glued rather than lock jointed, so they open after one move and the paint cracks at the arris. And there is no ballast, so a tall plinth with a light object on it can be knocked over by somebody walking past with a coat. Ours are 18mm on a braced internal frame, lock jointed at every corner, and ballasted at the base on anything over 900mm tall.

Specification

• Dimensions: see the product name
• Display surface: not applicable
• Construction: steel, nylon or moulded plastic depending on the item
• Finish: as supplied
• Load rating: stated on the pack
• Levelling: not applicable
• Security: not applicable
• Delivery: one small parcel
• Weight: approximately 0.4 kilograms
• Fits our pieces and most standard sizes
• Free with any package if you ask at the checkout
• No tools needed beyond a spanner

What you get

• The item as described
• Fixings where the item needs them
• A fitting note

Setting it up

Arrives assembled and blanket wrapped. Stand it where you want it, level it on the feet, and take the wrapping back to the van, which the delivery crew will do.

Specifying it

Buy the module rather than the piece. A shop that standardises on three plinth footprints can group them, stack them and rearrange them for years, and a shop that buys whatever looked good at the time ends up with a stockroom full of furniture that does not go with anything. Our footprints are 300, 400 and 600mm square, which group into runs of any length, and the heights are on a 100mm ladder so the tops line up when you want them to and step evenly when you do not.